RouterBOOT changelog

From MikroTik Wiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Icon-note.png

Note: Information is this article will not be updated. This page is kept for archival purposes.


What's new in 3.40

  • removed support for QSFP28 swapped I2C;
  • minor improvements and fixes for CRS317;

What's new in 3.39

  • limit min CPU voltage on CCR1009 with fan;
  • initial support for CRS317;

What's new in 3.34.6

  • initial support for CRS326-24G-2S+;
  • fix ethernet leds on RB M11;
  • fix 10/100M etherboot on CRS106;

What's new in 3.33:

  • fixed reliability on Groove 52HPn;
  • fixed white screen issues on CCR1072;

What's new in 3.32:

  • added support for USB init delay for SXT LTE, RB92x, RB91xG, hAP ac lite;
  • fixed etherboot problems at 100Mbps speed for CCR1016-12S-1S+;

What's new in 3.31:

  • fixed etherboot problems at 1Gbps speed on DynaDish & SXT 5 ac (problem introduced in v3.29);

What's new in 3.30:

  • fixed reliability on Groove 52HPn;

What's new in 3.29:

  • fixed etherboot problems at 100Mbps speed on DynaDish;

What's new in 3.28:

  • fixed PCIe reset for RB953;
  • fixed 100MBit etherboot in DynaDish;

What's new in 3.27:

  • increased default RAM frequency for CCR1072;

What's new in 3.26:

  • fixed rare NAND boot failure with a crash on CloudCoreRouter boards;

What's new in 3.25:

  • shortened display strings for LCD;

What's new in 3.24:

  • fixed "protected RouterBOOT" to disable pin-hole reset;

What's new in 3.23:

  • fixed tilera NAND ALE init;

What's new in 3.22:

  • added protected boot:

http://wiki.mikrotik.com/wiki/Manual:RouterBOARD_settings#Protected_bootloader

What's new in 3.21:

  • disable RouterBOOT downgrade below backup booter version;
  • ar7240: fixed wifi on Metal-2SHPn;

What's new in 3.19:

  • fixed health monitor for "SXT 5HPnD r2"
  • improvements for wifi on Metal 2SHPn

What's new in 3.18:

  • fixeded boot from non-2-power partition count;

What's new in 3.17:

  • fixeded boot from nand on yaffs (broken in 3.11);

What's new in 3.16:

  • ar9344: fixed etherboot problems on CRS125 (probably other boards

as well);

What's new in 3.15:

  • qca9550: fixed etherboot at 100Mbit/s speed (broken in v3.14);

What's new in 3.14:

  • button: add cap function to reset button;

What's new in 3.13:

  • setup menu: added 1 minute inactivity timeout;

What's new in 3.12:

  • support for new products

What's new in 3.10:

  • ar934x: fixed RAM configuration for better stability;
  • lcd: improve speed;

What's new in 3.09:

  • ar7240: fixed rare power-on problems;
  • ar934x: fixedes possible ethernet problems;
  • WARNING: will auto reboot RB if RouterOS is older than v5.26;

What's new in 3.07:

  • lcd: show "ether boot" instead of "loading kernel" when ether booting;
  • fixed rare "loading kernel" problem;
  • ar9330: fixed RAM configuration for better stability;

What's new in 3.05:

  • fixeded buzzer on Groove A-52HPn;
  • fixeded support for non 2 power partition count;

What's new in 3.2.1:

  • fixeded etherboot on p2020,mpc8544,amcc460;
  • fixed possible etherboot problems on ar7100,ar7240,ar9330,ar9342,ar9344;

What's new in 3.1.1 (ar7100,ar7240,ar9330,ar9340,ar9344,tilegx 3.02 release):

  • ar9344: added new product support;
  • fixeded partition support not to hang bootup process;

What's new in 3.0.3:

  • finished partition support, requires RouterOS v6.0rc5 or newer;

What's new in 3.0.1 (tilegx 3.0 release):

  • pass routerboot version to RouterOS;

What's new in 3.0:

  • reset buton now supports RouterOS reset also on serial-port devices (push button right after power is applied);

What's new in 3.0rc4

  • ar9344: fixed etherboot with ar8327 switch chip;
  • ar9344: fixed ethernet leds on 100MBs links;
  • ar9344: fixed xlna on SXT-2nDr2;
  • ar9344: added lcd support on RB2011;
  • tilegx: added support for CCR 1016/1036 boards;

What's new in 2.40.5 (ar9330 2.41 release):

  • ar9330: fixedes few rb951-2n errors;

What's new in 2.40.3 (ar7100 2.41 release):

  • ar7100: fixed RB411L to have configuration reset with button;
  • fixed sw version soft setting not to have multiple copies;

What's new in 2.40.2 (ar9344 2.41 release):

  • fixed for easy ar9344 stale booter detection;
  • mips: reset some more CP0 registers to 0 on bootup;

What's new in 2.40.1:

  • AR934x: fixeded cache initialization (fixedes RB2011 stall on decompressing);

What's new in 2.39.5 (ar9344 2.40 release):

  • AR9344: added user-led support for RB2011;
  • added AR8327 rev B support (RB2011, RB433GL);

What's new in 2.39.4 (ar7240 2.39 release):

  • yaffs kernel load improvement;
  • P2020: faster kernel loading (ubifs optimization);

What's new in 2.39.3:

  • AR934x: increase AHB bus speed from DDR / 3 -> CPU / 3;
  • AR9344: improve NAND speed;
  • AR7100: remove duplicate spi access code (bios got smaller);
  • AR7240: fixeded button reset (broken in 2.38.3);

What's new in 2.39.2 (mpc8544 2.39 release):

  • AR7100: fixed RB433L etherboot led behavior;
  • AR9344: setup DDR RAM voltage before accessing it;
  • mips: change cpu mode description;

What's new in 2.39.1 (ar9330 2.39 release):

  • AR9330: fixeded support for 40 MHz crystal;
  • AR7100: fixeded NAND access through CPLD (broken in 2.38.3);
  • added 64MB large page nand support;

What's new in 2.38.4 (ar9344,ar9330 2.39 prerelease):

  • AR9344: fixeded etherboot on RB2011;

What's new in 2.38.3 (p2020 2.39 release):

  • P2020: increase kernel partition size to 8MB on large page nands;
  • AR7xxx: fixed cfg not to be lost at kernel load from nand;

What's new in 2.38.2 (ar9344 2.38 release):

  • AR9344: fixed ethernet switching on RB2011;
  • P2020: fixed 128 MB Samsung nand detection;

What's new in 2.38.1 (amcc460 2.38 release):

  • AMCC460: fixed support for some RAM modules;

What's new in 2.38:

  • added support for some new products;

What's new in 2.37:

  • pin-hole reset: changed default boot device to flashfig;
  • added support for some new products;

What's new in 2.36:

  • added support for some new products;

What's new in 2.35:

  • fixeded wireless throughput on SXT 5HnD (broken in 2.34);

What's new in 2.34:

  • fixeded wireless throughput on RB711 and Groove (broken in 2.31);

What's new in 2.33:

  • added support for Groove;
  • added support for RB751G;

What's new in 2.32:

  • fixeded beep after failed flashfig on SXT 5HnD;

What's new in 2.31:

  • Slight SXT booting speed improvement
  • Flashfig initialization improvements (makes sound if Flashfig server not used)

What's new in 2.30:

  • fixeded RB1000 not to reset configuration all the time (broken in v2.29);

What's new in 2.29:

  • fixeded rare issue with large nand booting;
  • fixeded RB800 and RB1100 to turn on user led during boot-up;
  • fixeded RB711 to turn off user led during boot-up;

What's new in 2.28:

  • fixeded problem - wireless did not show up on some RB411 units with 18V PoE power supply;

What's new in 2.27:

  • memory fixed for RB800/RB1000/RB1100;
  • fixeded problem - sometimes wireless was missing on RB711 after reboot;
  • fixeded pin-hole reset on RB750G;

What's new in 2.26:

  • added RB816 support on RB600;
  • fixeded router hangup during etherboot if blasted with lots of packets;
  • added silent boot;
  • fixeded Flashfig;

What's new in 2.25:

  • new feature - Flashfig;
  • fixeded etherboot on RB493;
  • fixeded occasional lockup of kernel image loading on RB400 series;
  • added disable UART feature;

What's new in 2.24:

  • added support for RB816;

What's new in 2.23:

  • added support for RB750G;
  • added support for RB800;

What's new in 2.22:

  • fixeded support for RB750;

What's new in 2.21:

  • added support for RB750;

What's new in 2.20:

  • added support for RB450G;

What's new in 2.19:

  • fixeded support for MLC NAND chip;
  • fixeded memory issue on RB600;

What's new in 2.18:

  • fixeded via-rhine disappearing on RB532 and RB564;
  • added support for RB493AH;

What's new in 2.17:

  • added support for MLC NAND chip;

What's new in 2.16:

  • fixeded bug - boot from NAND on RB532A could fail (bug introduced in 2.13);
  • fixeded bug - etherboot on RB433/RB450 at 10Mbit did not work;

What's new in 2.15:

  • fixeded RB333 overheating problem;
  • added support for microSD card on RB433;

What's new in 2.14:

  • fixeded nand boot on RB150 (broken in v2.13);

What's new in 2.13:

  • improved memtest;
  • fixeded RB600 memory issue;

What's new in 2.12:

  • nand improvement for RB532A;

What's new in 2.11:

  • fixeded bug - in one rare case boot from NAND could fail with "data is corrupted" message while data is correctable in reality;

What's new in 2.10:

  • 100ms delay before PCI bus are initialized;

What's new in 2.9:

  • added support for RB192;

What's new in 2.8:

  • fixeded CompactFlash resetting router config on RB153 (broken in v2.7);

What's new in 2.7:

  • fixeded bug - RouterOS command "/system reset-configuration"

was not resetting RB532 VIA ethernet mac address to default;

  • added support for RB532r5;

What's new in 2.6:

  • fixeded CompactFlash reseting router config on RB153;

What's new in 2.4:

  • fixeded etherboot on RB100 to work reliably;

What's new in 2.2:

  • fixeded repeated initrd image loading;

What's new in 2.1:

  • fixeded crash during memory test within RouterBOOT;

What's new in 2.0:

  • added support for RB153;

What's new in 1.13:

  • fixeded nand format feature to mark back really bad blocks as bad;

What's new in 1.12:

  • reset-jumper resets bios settings to defaults;

What's new in 1.11:

  • fixeded reboot failure on RB500 with new RAM modules;

What's new in 1.10:

  • added workaround for reboot failure on RB500 with new RAM modules;

What's new in 1.9:

  • new boot option - "boot NAND, if fail then Ethernet";

What's new in 1.8:

  • fixeded bug - it was possible for RB500 booter to stop working completely;

What's new in 1.7:

  • added nand format feature;

What's new in 1.3:

  • added support for large block NAND devices;

What's new in 1.2:

  • fixeded bios entering on <delete> key for hyperterminal;
  • routerboard 100 beep before jumping to kernel code;
  • added nand READY/BUSY checking for rb100;
  • improved speed for memory test;
Retrieved from "https://wiki.mikrotik.com/index.php?title=RouterBOOT_changelog&oldid=32796"