Difference between revisions of "RouterBOOT changelog"

From MikroTik Wiki
Jump to navigation Jump to search
Line 1: Line 1:
What's new in 3.12 since 3.2.1:
*) added support for new products
What's new in 3.2.1:
What's new in 3.2.1:



Revision as of 09:11, 31 January 2014

What's new in 3.12 since 3.2.1:

  • ) added support for new products

What's new in 3.2.1:

  • ) fixed etherboot on p2020,mpc8544,amcc460;
  • ) fix possible etherboot problems on ar7100,ar7240,ar9330,ar9342,ar9344;

What's new in 3.1.1 (ar7100,ar7240,ar9330,ar9340,ar9344,tilegx 3.02 release):

  • ) ar9344: added new product support;
  • ) fixed partition support not to hang bootup process;

What's new in 3.0.3:

  • ) finished partition support, requires RouterOS v6.0rc5 or newer;

What's new in 3.0.1 (tilegx 3.0 release):

  • ) pass routerboot version to RouterOS;

What's new in 3.0:

  • ) reset buton now supports RouterOS reset also on serial-port devices (push button right after power is applied);

What's new in 3.0rc4

  • ) ar9344: fix etherboot with ar8327 switch chip;
  • ) ar9344: fix ethernet leds on 100MBs links;
  • ) ar9344: fix xlna on SXT-2nDr2;
  • ) ar9344: added lcd support on RB2011;
  • ) tilegx: added support for CCR 1016/1036 boards;

What's new in 2.40.5 (ar9330 2.41 release):

  • ) ar9330: fixes few rb951-2n errors;

What's new in 2.40.3 (ar7100 2.41 release):

  • ) ar7100: fix RB411L to have configuration reset with button;
  • ) fix sw version soft setting not to have multiple copies;

What's new in 2.40.2 (ar9344 2.41 release):

  • ) fix for easy ar9344 stale booter detection;
  • ) mips: reset some more CP0 registers to 0 on bootup;

What's new in 2.40.1:

  • ) AR934x: fixed cache initialization (fixes RB2011 stall on decompressing);

What's new in 2.39.5 (ar9344 2.40 release):

  • ) AR9344: added user-led support for RB2011;
  • ) added AR8327 rev B support (RB2011, RB433GL);

What's new in 2.39.4 (ar7240 2.39 release):

  • ) yaffs kernel load improvement;
  • ) P2020: faster kernel loading (ubifs optimization);

What's new in 2.39.3:

  • ) AR934x: increase AHB bus speed from DDR / 3 -> CPU / 3;
  • ) AR9344: improve NAND speed;
  • ) AR7100: remove duplicate spi access code (bios got smaller);
  • ) AR7240: fixed button reset (broken in 2.38.3);

What's new in 2.39.2 (mpc8544 2.39 release):

  • ) AR7100: fix RB433L etherboot led behavior;
  • ) AR9344: setup DDR RAM voltage before accessing it;
  • ) mips: change cpu mode description;

What's new in 2.39.1 (ar9330 2.39 release):

  • ) AR9330: fixed support for 40 MHz crystal;
  • ) AR7100: fixed NAND access through CPLD (broken in 2.38.3);
  • ) added 64MB large page nand support;

What's new in 2.38.4 (ar9344,ar9330 2.39 prerelease):

  • ) AR9344: fixed etherboot on RB2011;

What's new in 2.38.3 (p2020 2.39 release):

  • ) P2020: increase kernel partition size to 8MB on large page nands;
  • ) AR7xxx: fix cfg not to be lost at kernel load from nand;

What's new in 2.38.2 (ar9344 2.38 release):

  • ) AR9344: fix ethernet switching on RB2011;
  • ) P2020: fix 128 MB Samsung nand detection;

What's new in 2.38.1 (amcc460 2.38 release):

  • ) AMCC460: fix support for some RAM modules;

What's new in 2.38:

  • ) added support for some new products;

What's new in 2.37:

  • ) pin-hole reset: changed default boot device to flashfig;
  • ) added support for some new products;

What's new in 2.36:

  • ) added support for some new products;

What's new in 2.35:

  • ) fixed wireless throughput on SXT 5HnD (broken in 2.34);

What's new in 2.34:

  • ) fixed wireless throughput on RB711 and Groove (broken in 2.31);

What's new in 2.33:

  • ) added support for Groove;
  • ) added support for RB751G;

What's new in 2.32:

  • ) fixed beep after failed flashfig on SXT 5HnD;

What's new in 2.31:

  • ) Slight SXT booting speed improvement
  • ) Flashfig initialization improvements (makes sound if Flashfig server not used)

What's new in 2.30:

  • ) fixed RB1000 not to reset configuration all the time (broken in v2.29);

What's new in 2.29:

  • ) fixed rare issue with large nand booting;
  • ) fixed RB800 and RB1100 to turn on user led during boot-up;
  • ) fixed RB711 to turn off user led during boot-up;

What's new in 2.28:

  • ) fixed problem - wireless did not show up on some RB411 units with 18V PoE power supply;

What's new in 2.27:

  • ) memory fix for RB800/RB1000/RB1100;
  • ) fixed problem - sometimes wireless was missing on RB711 after reboot;
  • ) fixed pin-hole reset on RB750G;

What's new in 2.26:

  • ) added RB816 support on RB600;
  • ) fixed router hangup during etherboot if blasted with lots of packets;
  • ) added silent boot;
  • ) fixed Flashfig;

What's new in 2.25:

  • new feature - Flashfig;
  • fixed etherboot on RB493;
  • fixed occasional lockup of kernel image loading on RB400 series;
  • added disable UART feature;

What's new in 2.24:

  • added support for RB816;

What's new in 2.23:

  • added support for RB750G;
  • added support for RB800;

What's new in 2.22:

  • fixed support for RB750;

What's new in 2.21:

  • added support for RB750;

What's new in 2.20:

  • added support for RB450G;

What's new in 2.19:

  • fixed support for MLC NAND chip;
  • fixed memory issue on RB600;

What's new in 2.18:

  • fixed via-rhine disappearing on RB532 and RB564;
  • added support for RB493AH;

What's new in 2.17:

  • added support for MLC NAND chip;

What's new in 2.16:

  • fixed bug - boot from NAND on RB532A could fail (bug introduced in 2.13);
  • fixed bug - etherboot on RB433/RB450 at 10Mbit did not work;

What's new in 2.15:

  • fixed RB333 overheating problem;
  • added support for microSD card on RB433;

What's new in 2.14:

  • fixed nand boot on RB150 (broken in v2.13);

What's new in 2.13:

  • improved memtest;
  • fixed RB600 memory issue;

What's new in 2.12:

  • nand improvement for RB532A;

What's new in 2.11:

  • fixed bug - in one rare case boot from NAND could fail with "data is corrupted" message while data is correctable in reality;

What's new in 2.10:

  • 100ms delay before PCI bus are initialized;

What's new in 2.9:

  • added support for RB192;

What's new in 2.8:

  • fixed CompactFlash resetting router config on RB153 (broken in v2.7);

What's new in 2.7:

  • fixed bug - RouterOS command "/system reset-configuration"

was not resetting RB532 VIA ethernet mac address to default;

  • added support for RB532r5;

What's new in 2.6:

  • fixed CompactFlash reseting router config on RB153;

What's new in 2.4:

  • fixed etherboot on RB100 to work reliably;

What's new in 2.2:

  • fixed repeated initrd image loading;

What's new in 2.1:

  • fixed crash during memory test within RouterBOOT;

What's new in 2.0:

  • added support for RB153;

What's new in 1.13:

  • fixed nand format feature to mark back really bad blocks as bad;

What's new in 1.12:

  • reset-jumper resets bios settings to defaults;

What's new in 1.11:

  • fixed reboot failure on RB500 with new RAM modules;

What's new in 1.10:

  • added workaround for reboot failure on RB500 with new RAM modules;

What's new in 1.9:

  • new boot option - "boot NAND, if fail then Ethernet";

What's new in 1.8:

  • fixed bug - it was possible for RB500 booter to stop working completely;

What's new in 1.7:

  • added nand format feature;

What's new in 1.3:

  • added support for large block NAND devices;

What's new in 1.2:

  • fixed bios entering on <delete> key for hyperterminal;
  • routerboard 100 beep before jumping to kernel code;
  • added nand READY/BUSY checking for rb100;
  • improved speed for memory test;