Difference between revisions of "RouterBOOT changelog"

From MikroTik Wiki
Jump to navigation Jump to search
m (Added changes)
m
Line 1: Line 1:
What's new in 3.31:
What's new in 3.31:


*) fix etherboot problems at 1Gbps speed on DynaDish & SXT 5 ac (problem introduced in v3.29);
* fixed etherboot problems at 1Gbps speed on DynaDish & SXT 5 ac (problem introduced in v3.29);


What's new in 3.30:
What's new in 3.30:


*) fix reliability on Groove 52HPn;
* fixed reliability on Groove 52HPn;


What's new in 3.29:
What's new in 3.29:


*) fix etherboot problems at 100Mbps speed on DynaDish;
* fixed etherboot problems at 100Mbps speed on DynaDish;


What's new in 3.28:
What's new in 3.28:


*) fix PCIe reset for RB953;
* fixed PCIe reset for RB953;
*) fix 100MBit etherboot in DynaDish;
* fixed 100MBit etherboot in DynaDish;


What's new in 3.27:
What's new in 3.27:


*) increased default RAM frequency for CCR1072;  
* increased default RAM frequency for CCR1072;  


What's new in 3.26:
What's new in 3.26:


*) fix rare NAND boot failure with a crash on CloudCoreRouter boards;  
* fixed rare NAND boot failure with a crash on CloudCoreRouter boards;  


What's new in 3.25:
What's new in 3.25:


*) shortened display strings for LCD;  
* shortened display strings for LCD;  


What's new in 3.24:
What's new in 3.24:


*) fix "protected RouterBOOT" to disable pin-hole reset;
* fixed "protected RouterBOOT" to disable pin-hole reset;


What's new in 3.23:
What's new in 3.23:


*)  fix tilera NAND ALE init;
* fixed tilera NAND ALE init;


What's new in 3.22:
What's new in 3.22:


*) added protected boot:  
* added protected boot:  
http://wiki.mikrotik.com/wiki/Manual:RouterBOARD_settings#Protected_bootloader
http://wiki.mikrotik.com/wiki/Manual:RouterBOARD_settings#Protected_bootloader


What's new in 3.21:
What's new in 3.21:


*) disable RouterBOOT downgrade below backup booter version;
* disable RouterBOOT downgrade below backup booter version;
*) ar7240: fix wifi on Metal-2SHPn;
* ar7240: fixed wifi on Metal-2SHPn;


What's new in 3.19:  
What's new in 3.19:  


*) fix health monitor for "SXT 5HPnD r2"
* fixed health monitor for "SXT 5HPnD r2"
*) improvements for wifi on Metal 2SHPn
* improvements for wifi on Metal 2SHPn


What's new in 3.18:
What's new in 3.18:


*) fixed boot from non-2-power partition count;
* fixeded boot from non-2-power partition count;


What's new in 3.17:
What's new in 3.17:


*) fixed boot from nand on yaffs (broken in 3.11);
* fixeded boot from nand on yaffs (broken in 3.11);


What's new in 3.16:
What's new in 3.16:


*) ar9344: fix etherboot problems on CRS125 (probably other boards  
* ar9344: fixed etherboot problems on CRS125 (probably other boards  
as well);
as well);


What's new in 3.15:
What's new in 3.15:


*) qca9550: fix etherboot at 100Mbit/s speed (broken in v3.14);
* qca9550: fixed etherboot at 100Mbit/s speed (broken in v3.14);


What's new in 3.14:
What's new in 3.14:


*) button: add cap function to reset button;
* button: add cap function to reset button;


What's new in 3.13:
What's new in 3.13:


*) setup menu: added 1 minute inactivity timeout;
* setup menu: added 1 minute inactivity timeout;
What's new in 3.12:
What's new in 3.12:


*) support for new products
* support for new products


What's new in 3.10:
What's new in 3.10:


*) ar934x: fix RAM configuration for better stability;
* ar934x: fixed RAM configuration for better stability;
*) lcd: improve speed;
* lcd: improve speed;


What's new in 3.09:
What's new in 3.09:


*) ar7240: fix rare power-on problems;
* ar7240: fixed rare power-on problems;
*) ar934x: fixes possible ethernet problems;
* ar934x: fixedes possible ethernet problems;
*) WARNING: will auto reboot RB if RouterOS is older than v5.26;
* WARNING: will auto reboot RB if RouterOS is older than v5.26;


What's new in 3.07:
What's new in 3.07:


*) lcd: show "ether boot" instead of "loading kernel" when ether booting;
* lcd: show "ether boot" instead of "loading kernel" when ether booting;
*) fix rare "loading kernel" problem;
* fixed rare "loading kernel" problem;
*) ar9330: fix RAM configuration for better stability;
* ar9330: fixed RAM configuration for better stability;


What's new in 3.05:
What's new in 3.05:


*) fixed buzzer on Groove A-52HPn;
* fixeded buzzer on Groove A-52HPn;
*) fixed support for non 2 power partition count;
* fixeded support for non 2 power partition count;


What's new in 3.2.1:
What's new in 3.2.1:


*) fixed etherboot on p2020,mpc8544,amcc460;
* fixeded etherboot on p2020,mpc8544,amcc460;
*) fix possible etherboot problems on ar7100,ar7240,ar9330,ar9342,ar9344;
* fixed possible etherboot problems on ar7100,ar7240,ar9330,ar9342,ar9344;


What's new in 3.1.1 (ar7100,ar7240,ar9330,ar9340,ar9344,tilegx 3.02 release):
What's new in 3.1.1 (ar7100,ar7240,ar9330,ar9340,ar9344,tilegx 3.02 release):


*) ar9344: added new product support;
* ar9344: added new product support;
*) fixed partition support not to hang bootup process;
* fixeded partition support not to hang bootup process;


What's new in 3.0.3:
What's new in 3.0.3:


*) finished partition support, requires RouterOS v6.0rc5 or newer;
* finished partition support, requires RouterOS v6.0rc5 or newer;


What's new in 3.0.1 (tilegx 3.0 release):
What's new in 3.0.1 (tilegx 3.0 release):


*) pass routerboot version to RouterOS;
* pass routerboot version to RouterOS;


What's new in 3.0:
What's new in 3.0:


*) reset buton now supports RouterOS reset also on serial-port devices (push button right after power is applied);  
* reset buton now supports RouterOS reset also on serial-port devices (push button right after power is applied);  


What's new in 3.0rc4
What's new in 3.0rc4


*) ar9344: fix etherboot with ar8327 switch chip;
* ar9344: fixed etherboot with ar8327 switch chip;
*) ar9344: fix ethernet leds on 100MBs links;
* ar9344: fixed ethernet leds on 100MBs links;
*) ar9344: fix xlna on SXT-2nDr2;
* ar9344: fixed xlna on SXT-2nDr2;
*) ar9344: added lcd support on RB2011;
* ar9344: added lcd support on RB2011;
*) tilegx: added support for CCR 1016/1036 boards;
* tilegx: added support for CCR 1016/1036 boards;


What's new in 2.40.5 (ar9330 2.41 release):
What's new in 2.40.5 (ar9330 2.41 release):


*) ar9330: fixes few rb951-2n errors;
* ar9330: fixedes few rb951-2n errors;


What's new in 2.40.3 (ar7100 2.41 release):
What's new in 2.40.3 (ar7100 2.41 release):


*) ar7100: fix RB411L to have configuration reset with button;
* ar7100: fixed RB411L to have configuration reset with button;
*) fix sw version soft setting not to have multiple copies;
* fixed sw version soft setting not to have multiple copies;


What's new in 2.40.2 (ar9344 2.41 release):
What's new in 2.40.2 (ar9344 2.41 release):


*) fix for easy ar9344 stale booter detection;
* fixed for easy ar9344 stale booter detection;
*) mips: reset some more CP0 registers to 0 on bootup;
* mips: reset some more CP0 registers to 0 on bootup;


What's new in 2.40.1:
What's new in 2.40.1:


*) AR934x: fixed cache initialization (fixes RB2011 stall on decompressing);
* AR934x: fixeded cache initialization (fixedes RB2011 stall on decompressing);


What's new in 2.39.5 (ar9344 2.40 release):
What's new in 2.39.5 (ar9344 2.40 release):


*) AR9344: added user-led support for RB2011;
* AR9344: added user-led support for RB2011;
*) added AR8327 rev B support (RB2011, RB433GL);
* added AR8327 rev B support (RB2011, RB433GL);


What's new in 2.39.4 (ar7240 2.39 release):
What's new in 2.39.4 (ar7240 2.39 release):


*) yaffs kernel load improvement;
* yaffs kernel load improvement;
*) P2020: faster kernel loading (ubifs optimization);
* P2020: faster kernel loading (ubifs optimization);


What's new in 2.39.3:
What's new in 2.39.3:


*) AR934x: increase AHB bus speed from DDR / 3 -> CPU / 3;
* AR934x: increase AHB bus speed from DDR / 3 -> CPU / 3;
*) AR9344: improve NAND speed;
* AR9344: improve NAND speed;
*) AR7100: remove duplicate spi access code (bios got smaller);
* AR7100: remove duplicate spi access code (bios got smaller);
*) AR7240: fixed button reset (broken in 2.38.3);
* AR7240: fixeded button reset (broken in 2.38.3);


What's new in 2.39.2 (mpc8544 2.39 release):
What's new in 2.39.2 (mpc8544 2.39 release):


*) AR7100: fix RB433L etherboot led behavior;
* AR7100: fixed RB433L etherboot led behavior;
*) AR9344: setup DDR RAM voltage before accessing it;
* AR9344: setup DDR RAM voltage before accessing it;
*) mips: change cpu mode description;
* mips: change cpu mode description;


What's new in 2.39.1 (ar9330 2.39 release):
What's new in 2.39.1 (ar9330 2.39 release):


*) AR9330: fixed support for 40 MHz crystal;
* AR9330: fixeded support for 40 MHz crystal;
*) AR7100: fixed NAND access through CPLD (broken in 2.38.3);
* AR7100: fixeded NAND access through CPLD (broken in 2.38.3);
*) added 64MB large page nand support;
* added 64MB large page nand support;


What's new in 2.38.4 (ar9344,ar9330 2.39 prerelease):
What's new in 2.38.4 (ar9344,ar9330 2.39 prerelease):


*) AR9344: fixed etherboot on RB2011;
* AR9344: fixeded etherboot on RB2011;


What's new in 2.38.3 (p2020 2.39 release):
What's new in 2.38.3 (p2020 2.39 release):


*) P2020: increase kernel partition size to 8MB on large page nands;
* P2020: increase kernel partition size to 8MB on large page nands;
*) AR7xxx: fix cfg not to be lost at kernel load from nand;
* AR7xxx: fixed cfg not to be lost at kernel load from nand;


What's new in 2.38.2 (ar9344 2.38 release):
What's new in 2.38.2 (ar9344 2.38 release):


*) AR9344: fix ethernet switching on RB2011;
* AR9344: fixed ethernet switching on RB2011;
*) P2020: fix 128 MB Samsung nand detection;
* P2020: fixed 128 MB Samsung nand detection;


What's new in 2.38.1 (amcc460 2.38 release):
What's new in 2.38.1 (amcc460 2.38 release):


*) AMCC460: fix support for some RAM modules;
* AMCC460: fixed support for some RAM modules;


What's new in 2.38:
What's new in 2.38:


*) added support for some new products;
* added support for some new products;


What's new in 2.37:
What's new in 2.37:


*) pin-hole reset: changed default boot device to flashfig;
* pin-hole reset: changed default boot device to flashfig;
*) added support for some new products;
* added support for some new products;


What's new in 2.36:
What's new in 2.36:


*) added support for some new products;
* added support for some new products;


What's new in 2.35:
What's new in 2.35:


*) fixed wireless throughput on SXT 5HnD (broken in 2.34);
* fixeded wireless throughput on SXT 5HnD (broken in 2.34);


What's new in 2.34:
What's new in 2.34:


*) fixed wireless throughput on RB711 and Groove (broken in 2.31);
* fixeded wireless throughput on RB711 and Groove (broken in 2.31);


What's new in 2.33:
What's new in 2.33:


*) added support for Groove;
* added support for Groove;
*) added support for RB751G;
* added support for RB751G;


What's new in 2.32:
What's new in 2.32:


*) fixed beep after failed flashfig on SXT 5HnD;
* fixeded beep after failed flashfig on SXT 5HnD;


What's new in 2.31:
What's new in 2.31:


*) Slight SXT booting speed improvement
* Slight SXT booting speed improvement
*) Flashfig initialization improvements (makes sound if Flashfig server not used)
* Flashfig initialization improvements (makes sound if Flashfig server not used)


What's new in 2.30:
What's new in 2.30:


*) fixed RB1000 not to reset configuration all the time (broken in v2.29);
* fixeded RB1000 not to reset configuration all the time (broken in v2.29);


What's new in 2.29:
What's new in 2.29:


*) fixed rare issue with large nand booting;
* fixeded rare issue with large nand booting;
*) fixed RB800 and RB1100 to turn on user led during boot-up;
* fixeded RB800 and RB1100 to turn on user led during boot-up;
*) fixed RB711 to turn off user led during boot-up;
* fixeded RB711 to turn off user led during boot-up;


What's new in 2.28:
What's new in 2.28:


*) fixed problem - wireless did not show up on some RB411 units with 18V PoE power supply;
* fixeded problem - wireless did not show up on some RB411 units with 18V PoE power supply;


What's new in 2.27:
What's new in 2.27:


*) memory fix for RB800/RB1000/RB1100;
* memory fixed for RB800/RB1000/RB1100;
*) fixed problem - sometimes wireless was missing on RB711 after reboot;
* fixeded problem - sometimes wireless was missing on RB711 after reboot;
*) fixed pin-hole reset on RB750G;
* fixeded pin-hole reset on RB750G;


What's new in 2.26:
What's new in 2.26:


*) added RB816 support on RB600;
* added RB816 support on RB600;
*) fixed router hangup during etherboot if blasted with lots of packets;
* fixeded router hangup during etherboot if blasted with lots of packets;
*) added silent boot;
* added silent boot;
*) fixed Flashfig;
* fixeded Flashfig;


What's new in 2.25:
What's new in 2.25:


* new feature - Flashfig;
* new feature - Flashfig;
* fixed etherboot on RB493;
* fixeded etherboot on RB493;
* fixed occasional lockup of kernel image loading on RB400 series;
* fixeded occasional lockup of kernel image loading on RB400 series;
* added disable UART feature;
* added disable UART feature;


Line 276: Line 276:
What's new in 2.22:
What's new in 2.22:


* fixed support for RB750;
* fixeded support for RB750;


What's new in 2.21:
What's new in 2.21:
Line 288: Line 288:
What's new in 2.19:
What's new in 2.19:


* fixed support for MLC NAND chip;
* fixeded support for MLC NAND chip;
* fixed memory issue on RB600;
* fixeded memory issue on RB600;


What's new in 2.18:
What's new in 2.18:


* fixed via-rhine disappearing on RB532 and RB564;
* fixeded via-rhine disappearing on RB532 and RB564;
* added support for RB493AH;
* added support for RB493AH;


Line 302: Line 302:
What's new in 2.16:
What's new in 2.16:


* fixed bug - boot from NAND on RB532A could fail (bug introduced in 2.13);
* fixeded bug - boot from NAND on RB532A could fail (bug introduced in 2.13);
* fixed bug - etherboot on RB433/RB450 at 10Mbit did not work;
* fixeded bug - etherboot on RB433/RB450 at 10Mbit did not work;


What's new in 2.15:
What's new in 2.15:


* fixed RB333 overheating problem;
* fixeded RB333 overheating problem;
* added support for microSD card on RB433;
* added support for microSD card on RB433;


What's new in 2.14:
What's new in 2.14:


* fixed nand boot on RB150 (broken in v2.13);
* fixeded nand boot on RB150 (broken in v2.13);


What's new in 2.13:
What's new in 2.13:


* improved memtest;
* improved memtest;
* fixed RB600 memory issue;
* fixeded RB600 memory issue;


What's new in 2.12:
What's new in 2.12:
Line 325: Line 325:
What's new in 2.11:
What's new in 2.11:


* fixed bug - in one rare case boot from NAND could fail with "data is corrupted" message while data is correctable in reality;
* fixeded bug - in one rare case boot from NAND could fail with "data is corrupted" message while data is correctable in reality;


What's new in 2.10:
What's new in 2.10:
Line 337: Line 337:
What's new in 2.8:
What's new in 2.8:


* fixed CompactFlash resetting router config on RB153 (broken in v2.7);
* fixeded CompactFlash resetting router config on RB153 (broken in v2.7);


What's new in 2.7:
What's new in 2.7:


* fixed bug - RouterOS command "/system reset-configuration"
* fixeded bug - RouterOS command "/system reset-configuration"
was not resetting RB532 VIA ethernet mac address to default;
was not resetting RB532 VIA ethernet mac address to default;
* added support for RB532r5;
* added support for RB532r5;
Line 347: Line 347:
What's new in 2.6:
What's new in 2.6:


* fixed CompactFlash reseting router config on RB153;
* fixeded CompactFlash reseting router config on RB153;


What's new in 2.4:
What's new in 2.4:


* fixed etherboot on RB100 to work reliably;
* fixeded etherboot on RB100 to work reliably;


What's new in 2.2:
What's new in 2.2:


* fixed repeated initrd image loading;
* fixeded repeated initrd image loading;


What's new in 2.1:
What's new in 2.1:


* fixed crash during memory test within RouterBOOT;
* fixeded crash during memory test within RouterBOOT;


What's new in 2.0:
What's new in 2.0:
Line 367: Line 367:
What's new in 1.13:
What's new in 1.13:


* fixed nand format feature to mark back really bad blocks as bad;
* fixeded nand format feature to mark back really bad blocks as bad;


What's new in 1.12:
What's new in 1.12:
Line 375: Line 375:
What's new in 1.11:
What's new in 1.11:


* fixed reboot failure on RB500 with new RAM modules;
* fixeded reboot failure on RB500 with new RAM modules;


What's new in 1.10:
What's new in 1.10:
Line 387: Line 387:
What's new in 1.8:
What's new in 1.8:


* fixed bug - it was possible for RB500 booter to stop working completely;
* fixeded bug - it was possible for RB500 booter to stop working completely;


What's new in 1.7:
What's new in 1.7:
Line 399: Line 399:
What's new in 1.2:
What's new in 1.2:


* fixed bios entering on <delete> key for hyperterminal;
* fixeded bios entering on <delete> key for hyperterminal;
* routerboard 100 beep before jumping to kernel code;
* routerboard 100 beep before jumping to kernel code;
* added nand READY/BUSY checking for rb100;
* added nand READY/BUSY checking for rb100;
* improved speed for memory test;
* improved speed for memory test;

Revision as of 08:11, 9 June 2016

What's new in 3.31:

  • fixed etherboot problems at 1Gbps speed on DynaDish & SXT 5 ac (problem introduced in v3.29);

What's new in 3.30:

  • fixed reliability on Groove 52HPn;

What's new in 3.29:

  • fixed etherboot problems at 100Mbps speed on DynaDish;

What's new in 3.28:

  • fixed PCIe reset for RB953;
  • fixed 100MBit etherboot in DynaDish;

What's new in 3.27:

  • increased default RAM frequency for CCR1072;

What's new in 3.26:

  • fixed rare NAND boot failure with a crash on CloudCoreRouter boards;

What's new in 3.25:

  • shortened display strings for LCD;

What's new in 3.24:

  • fixed "protected RouterBOOT" to disable pin-hole reset;

What's new in 3.23:

  • fixed tilera NAND ALE init;

What's new in 3.22:

  • added protected boot:

http://wiki.mikrotik.com/wiki/Manual:RouterBOARD_settings#Protected_bootloader

What's new in 3.21:

  • disable RouterBOOT downgrade below backup booter version;
  • ar7240: fixed wifi on Metal-2SHPn;

What's new in 3.19:

  • fixed health monitor for "SXT 5HPnD r2"
  • improvements for wifi on Metal 2SHPn

What's new in 3.18:

  • fixeded boot from non-2-power partition count;

What's new in 3.17:

  • fixeded boot from nand on yaffs (broken in 3.11);

What's new in 3.16:

  • ar9344: fixed etherboot problems on CRS125 (probably other boards

as well);

What's new in 3.15:

  • qca9550: fixed etherboot at 100Mbit/s speed (broken in v3.14);

What's new in 3.14:

  • button: add cap function to reset button;

What's new in 3.13:

  • setup menu: added 1 minute inactivity timeout;

What's new in 3.12:

  • support for new products

What's new in 3.10:

  • ar934x: fixed RAM configuration for better stability;
  • lcd: improve speed;

What's new in 3.09:

  • ar7240: fixed rare power-on problems;
  • ar934x: fixedes possible ethernet problems;
  • WARNING: will auto reboot RB if RouterOS is older than v5.26;

What's new in 3.07:

  • lcd: show "ether boot" instead of "loading kernel" when ether booting;
  • fixed rare "loading kernel" problem;
  • ar9330: fixed RAM configuration for better stability;

What's new in 3.05:

  • fixeded buzzer on Groove A-52HPn;
  • fixeded support for non 2 power partition count;

What's new in 3.2.1:

  • fixeded etherboot on p2020,mpc8544,amcc460;
  • fixed possible etherboot problems on ar7100,ar7240,ar9330,ar9342,ar9344;

What's new in 3.1.1 (ar7100,ar7240,ar9330,ar9340,ar9344,tilegx 3.02 release):

  • ar9344: added new product support;
  • fixeded partition support not to hang bootup process;

What's new in 3.0.3:

  • finished partition support, requires RouterOS v6.0rc5 or newer;

What's new in 3.0.1 (tilegx 3.0 release):

  • pass routerboot version to RouterOS;

What's new in 3.0:

  • reset buton now supports RouterOS reset also on serial-port devices (push button right after power is applied);

What's new in 3.0rc4

  • ar9344: fixed etherboot with ar8327 switch chip;
  • ar9344: fixed ethernet leds on 100MBs links;
  • ar9344: fixed xlna on SXT-2nDr2;
  • ar9344: added lcd support on RB2011;
  • tilegx: added support for CCR 1016/1036 boards;

What's new in 2.40.5 (ar9330 2.41 release):

  • ar9330: fixedes few rb951-2n errors;

What's new in 2.40.3 (ar7100 2.41 release):

  • ar7100: fixed RB411L to have configuration reset with button;
  • fixed sw version soft setting not to have multiple copies;

What's new in 2.40.2 (ar9344 2.41 release):

  • fixed for easy ar9344 stale booter detection;
  • mips: reset some more CP0 registers to 0 on bootup;

What's new in 2.40.1:

  • AR934x: fixeded cache initialization (fixedes RB2011 stall on decompressing);

What's new in 2.39.5 (ar9344 2.40 release):

  • AR9344: added user-led support for RB2011;
  • added AR8327 rev B support (RB2011, RB433GL);

What's new in 2.39.4 (ar7240 2.39 release):

  • yaffs kernel load improvement;
  • P2020: faster kernel loading (ubifs optimization);

What's new in 2.39.3:

  • AR934x: increase AHB bus speed from DDR / 3 -> CPU / 3;
  • AR9344: improve NAND speed;
  • AR7100: remove duplicate spi access code (bios got smaller);
  • AR7240: fixeded button reset (broken in 2.38.3);

What's new in 2.39.2 (mpc8544 2.39 release):

  • AR7100: fixed RB433L etherboot led behavior;
  • AR9344: setup DDR RAM voltage before accessing it;
  • mips: change cpu mode description;

What's new in 2.39.1 (ar9330 2.39 release):

  • AR9330: fixeded support for 40 MHz crystal;
  • AR7100: fixeded NAND access through CPLD (broken in 2.38.3);
  • added 64MB large page nand support;

What's new in 2.38.4 (ar9344,ar9330 2.39 prerelease):

  • AR9344: fixeded etherboot on RB2011;

What's new in 2.38.3 (p2020 2.39 release):

  • P2020: increase kernel partition size to 8MB on large page nands;
  • AR7xxx: fixed cfg not to be lost at kernel load from nand;

What's new in 2.38.2 (ar9344 2.38 release):

  • AR9344: fixed ethernet switching on RB2011;
  • P2020: fixed 128 MB Samsung nand detection;

What's new in 2.38.1 (amcc460 2.38 release):

  • AMCC460: fixed support for some RAM modules;

What's new in 2.38:

  • added support for some new products;

What's new in 2.37:

  • pin-hole reset: changed default boot device to flashfig;
  • added support for some new products;

What's new in 2.36:

  • added support for some new products;

What's new in 2.35:

  • fixeded wireless throughput on SXT 5HnD (broken in 2.34);

What's new in 2.34:

  • fixeded wireless throughput on RB711 and Groove (broken in 2.31);

What's new in 2.33:

  • added support for Groove;
  • added support for RB751G;

What's new in 2.32:

  • fixeded beep after failed flashfig on SXT 5HnD;

What's new in 2.31:

  • Slight SXT booting speed improvement
  • Flashfig initialization improvements (makes sound if Flashfig server not used)

What's new in 2.30:

  • fixeded RB1000 not to reset configuration all the time (broken in v2.29);

What's new in 2.29:

  • fixeded rare issue with large nand booting;
  • fixeded RB800 and RB1100 to turn on user led during boot-up;
  • fixeded RB711 to turn off user led during boot-up;

What's new in 2.28:

  • fixeded problem - wireless did not show up on some RB411 units with 18V PoE power supply;

What's new in 2.27:

  • memory fixed for RB800/RB1000/RB1100;
  • fixeded problem - sometimes wireless was missing on RB711 after reboot;
  • fixeded pin-hole reset on RB750G;

What's new in 2.26:

  • added RB816 support on RB600;
  • fixeded router hangup during etherboot if blasted with lots of packets;
  • added silent boot;
  • fixeded Flashfig;

What's new in 2.25:

  • new feature - Flashfig;
  • fixeded etherboot on RB493;
  • fixeded occasional lockup of kernel image loading on RB400 series;
  • added disable UART feature;

What's new in 2.24:

  • added support for RB816;

What's new in 2.23:

  • added support for RB750G;
  • added support for RB800;

What's new in 2.22:

  • fixeded support for RB750;

What's new in 2.21:

  • added support for RB750;

What's new in 2.20:

  • added support for RB450G;

What's new in 2.19:

  • fixeded support for MLC NAND chip;
  • fixeded memory issue on RB600;

What's new in 2.18:

  • fixeded via-rhine disappearing on RB532 and RB564;
  • added support for RB493AH;

What's new in 2.17:

  • added support for MLC NAND chip;

What's new in 2.16:

  • fixeded bug - boot from NAND on RB532A could fail (bug introduced in 2.13);
  • fixeded bug - etherboot on RB433/RB450 at 10Mbit did not work;

What's new in 2.15:

  • fixeded RB333 overheating problem;
  • added support for microSD card on RB433;

What's new in 2.14:

  • fixeded nand boot on RB150 (broken in v2.13);

What's new in 2.13:

  • improved memtest;
  • fixeded RB600 memory issue;

What's new in 2.12:

  • nand improvement for RB532A;

What's new in 2.11:

  • fixeded bug - in one rare case boot from NAND could fail with "data is corrupted" message while data is correctable in reality;

What's new in 2.10:

  • 100ms delay before PCI bus are initialized;

What's new in 2.9:

  • added support for RB192;

What's new in 2.8:

  • fixeded CompactFlash resetting router config on RB153 (broken in v2.7);

What's new in 2.7:

  • fixeded bug - RouterOS command "/system reset-configuration"

was not resetting RB532 VIA ethernet mac address to default;

  • added support for RB532r5;

What's new in 2.6:

  • fixeded CompactFlash reseting router config on RB153;

What's new in 2.4:

  • fixeded etherboot on RB100 to work reliably;

What's new in 2.2:

  • fixeded repeated initrd image loading;

What's new in 2.1:

  • fixeded crash during memory test within RouterBOOT;

What's new in 2.0:

  • added support for RB153;

What's new in 1.13:

  • fixeded nand format feature to mark back really bad blocks as bad;

What's new in 1.12:

  • reset-jumper resets bios settings to defaults;

What's new in 1.11:

  • fixeded reboot failure on RB500 with new RAM modules;

What's new in 1.10:

  • added workaround for reboot failure on RB500 with new RAM modules;

What's new in 1.9:

  • new boot option - "boot NAND, if fail then Ethernet";

What's new in 1.8:

  • fixeded bug - it was possible for RB500 booter to stop working completely;

What's new in 1.7:

  • added nand format feature;

What's new in 1.3:

  • added support for large block NAND devices;

What's new in 1.2:

  • fixeded bios entering on <delete> key for hyperterminal;
  • routerboard 100 beep before jumping to kernel code;
  • added nand READY/BUSY checking for rb100;
  • improved speed for memory test;