View source for Setting up an IPv6 tunnel via 6to4

You '''must''' have a static IP address for this to work.

This is some necessary information:
    Static IPv4 address: 62.157.9.98
    Static IPv6 address: 2002:3e9d:0962:1::1 
    Usable /48: 2002:3e9d:0962::/48
Note: A 6to4 calculator is available at [http://grox.net/utils/ipv6.php grox.net] - select IPv4 to 6to4 address

[[Image:6to4.gif]]

Setup the 6to4 interface

    /interface 6to4 add mtu=1280 name=ipng-tunnel local-address=62.157.9.98 remote-address=192.88.99.1 disabled=no


Add your client IPv6 address to the new interface

    /ipv6 address add address=2002:3e9d:0962:1::1/3 interface=ipng-tunnel

Add a default route to the global IPv6 Internet through the tunnel interface using the anycast IPv4 address:
 ipv6 route add dst-address=2000::/3 gateway=::192.88.99.1,ipng-tunnel

Syntax for RouterOS v4.x, or RouterOS 3.x with '''routing-test''':
 ipv6 route add dst-address=2000::/3 gateway=::192.88.99.1%ipng-tunnel

You can now add your IPv6 addresses as required for your internal network.

Example:

    /ipv6 address add address=2002:3e9d:0962:2::1/64 interface=ether1 advertise=yes disabled=no 


Image taken from [http://www.onlamp.com/pub/a/onlamp/2001/06/01/ipv6_tutorial.html O'Reilly ONLamp]

[[Category:IPv6]]