Setting up an IPv6 tunnel via 6to4

From MikroTik Wiki
Revision as of 20:08, 5 March 2011 by Webasdf (talk | contribs)
Jump to: navigation, search

You must have a static IP address for this to work.

This is some necessary information:

   Static IPv4 address:
   Static IPv6 address: 2002:3e9d:0962:1::1 
   Usable /48: 2002:3e9d:0962::/48

Note: A 6to4 calculator is available at - select IPv4 to 6to4 address


Setup the 6to4 interface

   /interface 6to4 add mtu=1280 name=ipng-tunnel local-address= remote-address= disabled=no

Add your client IPv6 address to the new interface

   /ipv6 address add address=2002:3e9d:0962:1::1/3 interface=ipng-tunnel

You can now add your IPv6 addresses as required.


   /ipv6 address add address=2002:3e9d:0962:2::1/64 interface=ether1 advertise=yes disabled=no 

Image taken from O'Reilly ONLamp