Setting up an IPv6 tunnel via 6to4

From MikroTik Wiki
Revision as of 10:34, 7 April 2009 by Tagno25 (talk | contribs) (New page: You '''must''' have a static IP address for this to work and remain stable. This is some necessary information: Static IPv4 address: 62.157.9.98 Static IPv6 address: 2002:3e9d:096...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

You must have a static IP address for this to work and remain stable.

This is some necessary information:

   Static IPv4 address: 62.157.9.98
   Static IPv6 address: 2002:3e9d:0962:1::1
   Usable /48: 2002:3e9d:0962::/48

6to4.gif

Setup the 6to4 interface

/interface 6to4 add mtu=1280 name=ipng-tunnel local-address=62.157.9.98 remote-address=192.88.99.1 disabled=no


Add your client IPv6 address to the new interface

/ipv6 address add address=2002:3e9d:0962:1::1/3 interface=ipng-tunnel


You can now add your IPv6 addresses as required.

Image taken from O'Reilly ONLamp