Setting up an IPv6 tunnel via 6to4
You must have a static IP address for this to work.
This is some necessary information:
Static IPv4 address: 18.104.22.168 Static IPv6 address: 2002:3e9d:0962:1::1 Usable /48: 2002:3e9d:0962::/48
Note: A 6to4 calculator is available at grox.net - select IPv4 to 6to4 address
Setup the 6to4 interface
/interface 6to4 add mtu=1280 name=ipng-tunnel local-address=22.214.171.124 remote-address=126.96.36.199 disabled=no
Add your client IPv6 address to the new interface
/ipv6 address add address=2002:3e9d:0962:1::1/3 interface=ipng-tunnel
You can now add your IPv6 addresses as required.
/ipv6 address add address=2002:3e9d:0962:2::1/64 interface=ether1 advertise=yes disabled=no
Image taken from O'Reilly ONLamp