Uploads by Janisk
Jump to navigation
Jump to search
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 12:35, 14 July 2016 | Hyper9.png (file) |  |
58 KB | after starting the guest machine. | 1 |
| 12:35, 14 July 2016 | Hyper8.png (file) |  |
58 KB | Congratulations! You are done with the creation of a new guest CHR router | 1 |
| 12:34, 14 July 2016 | Hyper7.png (file) |  |
70 KB | Select the downloaded image | 1 |
| 12:33, 14 July 2016 | Hyper6.png (file) |  |
68 KB | Do not create a new drive for the guest, instead, select option - "Use existing disk" and browse to the download folder where you have downloaded the VHDX image from the MikroTik download page. | 1 |
| 12:31, 14 July 2016 | Hyper5.png (file) |  |
54 KB | Choose networking capabilities for your new router | 1 |
| 12:31, 14 July 2016 | Hyper4.png (file) |  |
58 KB | select amount of RAM available, deselect dynamic management | 1 |
| 12:30, 14 July 2016 | Hyper3.png (file) |  |
60 KB | Choose "Generation 1" guest | 1 |
| 12:29, 14 July 2016 | Hyper2.png (file) |  |
63 KB | Choose name of the guest | 1 |
| 12:28, 14 July 2016 | Hyper1.png (file) |  |
56 KB | Choose to make new Hyper-V guest | 1 |
| 11:43, 9 December 2015 | Vbox6.png (file) |  |
22 KB | 1 | |
| 11:43, 9 December 2015 | Vbox8.png (file) |  |
21 KB | 1 | |
| 11:42, 9 December 2015 | Vbox7.png (file) |  |
21 KB | 1 | |
| 11:42, 9 December 2015 | Vbox5.png (file) |  |
90 KB | 1 | |
| 11:42, 9 December 2015 | Vbox4.png (file) |  |
85 KB | 1 | |
| 11:41, 9 December 2015 | Vbox3.png (file) |  |
59 KB | 1 | |
| 11:41, 9 December 2015 | Vbox2.png (file) |  |
71 KB | 1 | |
| 11:41, 9 December 2015 | Vbox1.png (file) |  |
69 KB | 1 | |
| 14:23, 27 March 2014 | CCR1036-8splus-diagram.png (file) |  |
204 KB | CCR 1036 8g 2s+ stream diagram | 1 |
| 10:23, 11 October 2011 | Dst-nat.png (file) |  |
23 KB | minimal settings for dst-nat to work | 1 |
| 10:05, 30 September 2011 | Correct address 1.png (file) |  |
15 KB | 1 | |
| 13:17, 29 September 2011 | Wifi freq usage1.png (file) |  |
14 KB | 1 | |
| 13:15, 29 September 2011 | Wifi freq usage.png (file) |  |
15 KB | correct file uploaded | 2 |
| 12:56, 29 September 2011 | Wifi select country.png (file) |  |
16 KB | slect country from the list | 1 |
| 12:55, 29 September 2011 | Wifi adv mode.png (file) |  |
26 KB | where to select advanced mode configuration for fiwi | 1 |
| 12:17, 29 September 2011 | Change passwd current user.png (file) |  |
6 KB | 1 | |
| 11:55, 29 September 2011 | Enable wireless.png (file) |  |
26 KB | 1 | |
| 11:55, 29 September 2011 | Goto wireless.png (file) |  |
37 KB | 1 | |
| 11:55, 29 September 2011 | Add default route.png (file) |  |
18 KB | 1 | |
| 11:54, 29 September 2011 | Check nat masquerade.png (file) |  |
33 KB | 1 | |
| 11:47, 29 September 2011 | Go to DNS settings.png (file) |  |
20 KB | 1 | |
| 11:46, 29 September 2011 | Route add gateway.png (file) |  |
6 KB | add gateway | 1 |
| 11:46, 29 September 2011 | To the routes.png (file) |  |
33 KB | to the routes menu | 1 |
| 10:41, 29 September 2011 | Set up bridge.png (file) |  |
12 KB | bridge with all ports added | 1 |
| 10:39, 29 September 2011 | Add bridge port.png (file) |  |
21 KB | add bridge port | 1 |
| 10:20, 29 September 2011 | Brtidge ports view.png (file) |  |
12 KB | check bridge ports | 1 |
| 09:44, 29 September 2011 | Wireless ht.png (file) |  |
12 KB | wireless HT settings | 1 |
| 09:44, 29 September 2011 | Wireless general.png (file) |  |
24 KB | general settings set up | 1 |
| 16:09, 28 September 2011 | Creating security profile.png (file) |  |
29 KB | 2 | |
| 15:56, 28 September 2011 | Secuirtas profle.png (file) |  |
37 KB | locating security profle | 1 |
| 15:39, 28 September 2011 | Remove bridge port.png (file) |  |
19 KB | how to and where remove bridge ports | 1 |
| 15:25, 28 September 2011 | Master port.png (file) |  |
25 KB | check the master port setting | 1 |
| 15:21, 28 September 2011 | Interface open details.png (file) |  |
38 KB | open ethernet interface details to check if it is set as part of switch | 1 |
| 14:02, 28 September 2011 | Sntp client setup.png (file) |  |
48 KB | setting up sntp server | 1 |
| 13:43, 28 September 2011 | For 2 dns servers.png (file) |  |
2 KB | adding several dns ip addresses | 1 |
| 13:39, 28 September 2011 | Dns add server.png (file) |  |
13 KB | setting up dns server ip address and allowing remote requests | 1 |
| 12:30, 28 September 2011 | Masqurade rule.png (file) |  |
9 KB | how it should look without extra fields | 1 |
| 11:59, 28 September 2011 | Adding new address.png (file) |  |
12 KB | adding new address | 1 |
| 11:54, 28 September 2011 | Add new address.png (file) |  |
18 KB | getting to address menu | 1 |
| 11:16, 28 September 2011 | DHCP client.png (file) |  |
20 KB | inspecting dhcp client status and important fields | 1 |
| 10:51, 28 September 2011 | Change password user edit.png (file) |  |
8 KB | change/create password screen. | 1 |
