SwOS/CSS326: Difference between revisions
< SwOS
Jump to navigation
Jump to search
(Created page with "==Summary== <p> SwOS is an operating system designed specifically for administration of MikroTik Switch products. </p> <p> SwOS is configurable from your web browser. It gi...") |
mNo edit summary |
||
| Line 12: | Line 12: | ||
<p>Open your web browser and enter IP address of your Switch (192.168.88.1 by default) and login screen will appear.</p> | <p>Open your web browser and enter IP address of your Switch (192.168.88.1 by default) and login screen will appear.</p> | ||
[[File: | [[File:swos_login_css326.png|center|alt=Alt text|CSS326-24G-2S+ SwOS Login|frame]] | ||
<p>SwOS default <i>IP address:</i> <b>192.168.88.1</b>, <i>user name:</i> <b>admin</b> and there is no password. | <p>SwOS default <i>IP address:</i> <b>192.168.88.1</b>, <i>user name:</i> <b>admin</b> and there is no password. | ||
| Line 22: | Line 22: | ||
<p> | <p> | ||
SwOS interface menu consists of | CSS326-24G-2S+ SwOS interface menu consists of multiple tabs: Link, SFP, SFP Status, Port Isolation, LAG, Forwarding, Stats, Errors, Histogram, VLAN, VLANs, Static Hosts, Hosts, SNMP, ACL, System and Upgrade. | ||
</p> | </p> | ||
| Line 51: | Line 51: | ||
* Switch management | * Switch management | ||
* Configuration reset | * Configuration reset | ||
* Backup and restore configuration | * Backup and restore configuration</p> | ||
<br /> | <br /> | ||
[[File:swos_system_css326.png|alt=Alt text|General settings|center|frame]] | [[File:swos_system_css326.png|alt=Alt text|CSS326-24G-2S+ General settings|center|frame]] | ||
{{ Note | SwOS uses a simple algorithm to ensure TCP/IP communication - it just replies to the same IP and MAC address packet came from. This way there is no need for Default Gateway on the device itself.}} | {{ Note | SwOS uses a simple algorithm to ensure TCP/IP communication - it just replies to the same IP and MAC address packet came from. This way there is no need for Default Gateway on the device itself.}} | ||
| Line 82: | Line 81: | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
<td><b> | <td><b>Independent VLAN Lookup</b></td><td>Enable or disable Independent VLAN lookup in the Host table</td> | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
<td><b>Watchdog</b></td><td>Enable or disable system watchdog. It will reset CPU of the switch in case of fault condition</td> | <td><b>Watchdog</b></td><td>Enable or disable system watchdog. It will reset CPU of the switch in case of fault condition</td> | ||
</tr> | |||
<tr> | |||
<td><b>Mikrotik Discovery Protocol</b></td><td>Enable or disable Mikrotik neighbor discovery protocol</td> | |||
</tr> | </tr> | ||
<tr> | <tr> | ||
| Line 99: | Line 101: | ||
[[File:swos_system2_css326.png|alt=Alt text|System management settings|center|frame]] | [[File:swos_system2_css326.png|alt=Alt text|CSS326-24G-2S+ System management settings|center|frame]] | ||
===Health and Global RSTP=== | ===Health and Global RSTP=== | ||
<br /> | <br /> | ||
[[File:swos_system3_css326.png|alt=Alt text|CSS326 Health and Global RSTP settings|center|frame]] | [[File:swos_system3_css326.png|alt=Alt text|CSS326-24G-2S+ Health and Global RSTP settings|center|frame]] | ||
| Line 114: | Line 116: | ||
<td><b>Temperature</b></td><td>Shows PCB temperature in celsius temperature scale</td> | <td><b>Temperature</b></td><td>Shows PCB temperature in celsius temperature scale</td> | ||
</tr> | </tr> | ||
</table> | |||
<table class="styled_table" > | |||
<tr> | |||
<th width="25%">Property</th> | |||
<th >Description</th> | |||
</tr> | |||
<tr> | |||
<tr> | <tr> | ||
<td><b>Bridge Priority (hex)</b></td><td>If enabled, it will turn off short detection on all PoE out ports to allow use of longer ethernet cables. This is potentially dangerous setting and should be used with caution.</td> | <td><b>Bridge Priority (hex)</b></td><td>If enabled, it will turn off short detection on all PoE out ports to allow use of longer ethernet cables. This is potentially dangerous setting and should be used with caution.</td> | ||
Revision as of 08:40, 18 April 2017
Summary
SwOS is an operating system designed specifically for administration of MikroTik Switch products.
SwOS is configurable from your web browser. It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, broadcast storm control, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields.
Warning: Each RouterBoard switch series device has its own firmware which cannot be installed on other series models! CSS326-24G-2S+ supports SwOS v2.0 and newer.
Connecting to the Switch
Open your web browser and enter IP address of your Switch (192.168.88.1 by default) and login screen will appear.
CSS326-24G-2S+ SwOS Login
SwOS default IP address: 192.168.88.1, user name: admin and there is no password.
Note: MikroTik neighbor discovery protocol tools can be used to discover IP address of Mikrotik Switch. Manual:IP/Neighbor_discovery
Interface Overview
CSS326-24G-2S+ SwOS interface menu consists of multiple tabs: Link, SFP, SFP Status, Port Isolation, LAG, Forwarding, Stats, Errors, Histogram, VLAN, VLANs, Static Hosts, Hosts, SNMP, ACL, System and Upgrade.
Description of buttons in SwOS configuration tool:
- Append - add new item to the end of the list
- Apply All - applies current configuration changes
- Cut - removes item from the list
- Clear - resets properties of the item
- Discard Changes - removes unsaved configuration
- Insert - add new item to the list (places it before current item)
- Sort - sort VLAN table by VLAN-IDs; sort host table by MAC addresses
- Change Password - changes password of the switch
- Logout - logout from current Switch
- Reboot - reboot the switch
- Reset Configuration - reset configuration back to factory defaults
- Choose File - browse for upgrade or backup file
- Upgrade - upgrade firmware of the Switch
- Restore Backup - restore Switch using selected backup file
- Save Backup - generate and download backup file from the Switch
System Tab
System Tab performs the following functions:
- General information about Switch
- Switch management
- Configuration reset
- Backup and restore configuration
CSS326-24G-2S+ General settings
Note: SwOS uses a simple algorithm to ensure TCP/IP communication - it just replies to the same IP and MAC address packet came from. This way there is no need for Default Gateway on the device itself.
| Property | Description |
|---|---|
| IP Address | IP address of the Switch |
| Identity | Name of the Switch (for Mikrotik neighbor discovery protocol) |
| Allow From | IP address from which the service is accessible. Default value is '0.0.0.0/0' - any address |
| Allow From Ports | List of switch ports from which the service is accessible |
| Allow From VLAN | VLAN ID with which the service is accessible (VLAN Mode on ingress port must be other than disabled in order to connect)
|
| Independent VLAN Lookup | Enable or disable Independent VLAN lookup in the Host table |
| Watchdog | Enable or disable system watchdog. It will reset CPU of the switch in case of fault condition |
| Mikrotik Discovery Protocol | Enable or disable Mikrotik neighbor discovery protocol |
| MAC Address | MAC address of the Switch (Read-only) |
| Version | Firmware version of the Switch |
| Uptime | Current Switch uptime |
CSS326-24G-2S+ System management settings
Health and Global RSTP
CSS326-24G-2S+ Health and Global RSTP settings
| Property | Description |
|---|---|
| Temperature | Shows PCB temperature in celsius temperature scale |
| Property | Description |
|---|---|
| Bridge Priority (hex) | If enabled, it will turn off short detection on all PoE out ports to allow use of longer ethernet cables. This is potentially dangerous setting and should be used with caution. |
| Port Cost Mode | Shows the input voltage measured in volts |
| Root Bridge | Shows the input voltage measured in volts |