From MikroTik Wiki
Jump to navigation Jump to search


SwOS is an operating system designed specifically for administration of MikroTik switch products.

SwOS is configurable from your web browser. It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, broadcast storm control, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields.


Warning: Each RouterBoard switch series device has its own firmware which cannot be installed on other series models! CSS326-24G-2S+ supports SwOS v2.0 and newer.

Connecting to the Switch

Open your web browser and enter IP address of your Switch ( by default) and login screen will appear.

Alt text
CSS326-24G-2S+ SwOS Login

SwOS default IP address:, user name: admin and there is no password.


Note: MikroTik Neighbor Discovery protocol tools can be used to discover IP address of Mikrotik switch. Manual:IP/Neighbor_discovery

Interface Overview

CSS326-24G-2S+ SwOS interface menu consists of multiple tabs: Link, SFP, SFP Status, Port Isolation, LAG, Forwarding, Stats, Errors, Histogram, VLAN, VLANs, Static Hosts, Hosts, SNMP, ACL, System and Upgrade.

Description of buttons in SwOS configuration tool:

  • Append - add new item to the end of the list
  • Apply All - applies current configuration changes
  • Cut - removes item from the list
  • Clear - resets properties of the item
  • Discard Changes - removes unsaved configuration
  • Insert - add new item to the list (places it before current item)
  • Sort - sort VLAN table by VLAN-IDs; sort host table by MAC addresses

  • Change Password - changes password of the switch
  • Logout - logout from current Switch
  • Reboot - reboot the switch
  • Reset Configuration - reset configuration back to factory defaults
  • Choose File - browse for upgrade or backup file
  • Upgrade - upgrade firmware of the Switch
  • Restore Backup - restore Switch using selected backup file
  • Save Backup - generate and download backup file from the Switch


System Tab performs the following functions:

  • General information about Switch
  • Switch management
  • Configuration reset
  • Backup and restore configuration


Note: SwOS uses a simple algorithm to ensure TCP/IP communication - it just replies to the same IP and MAC address packet came from. This way there is no need for Default Gateway on the device itself.

Alt text
CSS326-24G-2S+ General Settings

Property Description
IP AddressIP address of the switch
IdentityName of the switch (for Mikrotik Neighbor Discovery protocol)
Allow FromIP address from which the switch is accessible. Default value is '' - any address
Allow From PortsList of switch ports from which it is accessible
Allow From VLANVLAN ID from which the switch is accessible (VLAN Mode on ingress port must be other than disabled in order to connect)
WatchdogEnable or disable system Watchdog. It will reset CPU of the switch in case of fault condition
Independent VLAN LookupEnable or disable independent VLAN lookup in the Host table for packet forwarding
Mikrotik Discovery ProtocolEnable or disable Mikrotik Neighbor Discovery protocol
MAC AddressMAC address of the switch (Read-only)
Serial NumberSerial number of the switch (Read-only)
Board NameMikroTik model name of the switch (Read-only)
UptimeCurrent switch uptime (Read-only)

Health and Global RSTP

Alt text
CSS326-24G-2S+ Health and Global RSTP Settings

Property Description
TemperatureShows PCB temperature in celsius temperature scale (Read-only)
Property Description
Bridge Priority (hex)RSTP bridge priority for Root Bridge selection
Port Cost ModeThere are two methods for automatically detecting RSTP port cost depending on link speed.
  • short: 10G - 2; 1G - 4; 100M - 10; 10M - 100
  • long: 10G - 2000; 1G - 20000; 100M - 200000; 10M - 2000000
Root BridgeThe priority and MAC address of the selected Root Bridge in the network (Read-only)

Password and Backup

Alt text
CSS326-24G-2S+ System Management Settings


Link Tab allows you to:

  • Configure Ethernet and SFP+ ports
  • Monitor link status of Ethernet and SFP+ ports

Alt text
CSS326-24G-2S+ Link Settings

Property Description
EnabledEnable or disable port
NameEditable port name
Link StatusCurrent link status (Read-only)
Auto NegotiationEnable or disable auto negotiation
SpeedSpecify speed setting of the port (requires auto negotiation to be disabled)
Full DuplexSpecify duplex mode of the port (requires auto negotiation to be disabled)
Flow control Enable or disable 802.3x Flow control

SFP and SFP Status

SFP and SFP Status Tabs allow you to monitor status of SFP modules.

Alt text

Alt text
SFP Status Tab

Port Isolation

Port Isolation table allows or restricts traffic forwarding between specific ports.

Alt text
CSS326-24G-2S+ Port Isolation Tab


CSS326-24G-2S+ supports 802.3ad (LACP) compatible link aggregation as well as static link aggregation to ensure failover and load balancing based on Layer2 and Layer3 hashing.

Up to 16 link aggregation groups with up to 8 ports per a group are supported.

Alt text
CSS326-24G-2S+ LAG Tab


Forwarding Tab provides advanced forwarding options among switch ports, port locking, port mirroring, bandwidth limit and broadcast storm control features.

Alt text
CSS326-24G-2S+ Forwarding Settings

Property Description
Port Lock
  • Port Lock - Enable or disable MAC address learning on this port
  • Lock On First - Enable or disable MAC address learning on this port (MAC address from the first received packet will still be learnt)
Port Mirroring
  • Mirror Ingress - Whether traffic entering this port must be copied and forwarded to mirroring target port
  • Mirror Egress - Whether traffic leaving this port must be copied and forwarded to mirroring target port
  • Mirror To - Mirroring target port
Broadcast Storm Control
  • Storm Rate (%) - Limit the number of broadcast packets transmitted by an interface. The rate is measured in percents of the link speed.
  • Include Unknown Unicast - Include unicast packets without an entry in host table in Storm Rate limitation
Bandwidth Limit
  • Ingress Rate - Limit traffic entering this port (bps)


Per port RSTP configuration and monitoring is available in the RSTP menu.

Alt text
CSS326-24G-2S+ RSTP Settings

Stats, Errors and Histogram

These menus provide detailed information about received and transmitted packets.

Alt text
CSS326-24G-2S+ Port Statistics
Alt text
CSS326-24G-2S+ Port Statistics
Alt text
CSS326-24G-2S+ Port Statistics


VLAN configuration for switch ports.

Alt text
CSS326-24G-2S+ Port VLAN Settings

VLAN membership configuration for switch ports.

Alt text
CSS326-24G-2S+ VLAN Membership Settings

VLAN Configuration Example

Port based VLAN configuration with CSS326-24G-2S+

Static Hosts

Static host table entries. Static entries will take over dynamic if dynamic entry with same mac-address already exists. Also by adding a static entry you get access to some more functionality.

Alt text
CSS326-24G-2S+ Static Host Table


This table represents dynamically learnt MAC address to port mapping entries. When Switch receives a packet from certain port, it adds the packets source MAC address and port it received the packet from to host table, so when a packet comes in with certain destination MAC address it knows to which port it should forward the packet. If the destination MAC address is not present in host table then it forwards the packet to all ports in the group. Dynamic entries take about 5 minutes to time out. CSS326-24G-2S+ supports 16383 host table entries.

Alt text
CSS326-24G-2S+ Host table