Difference between revisions of "Talk:How to make transparent web proxy"

From MikroTik Wiki
Jump to: navigation, search
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
[[Image:Example.jpg]]
+
Regarding "Webbox problem" - the webbox should work even with NAT rule in place. If it doesn't, contact MT support.
 
+
--[[User:Route|Route]] 11:28, 10 August 2009 (EEST)
== Redirecting directly using firewall rule ==
 
 
 
I found this on the MT Forums and I think it should be in this page:
 
 
 
<code>/ip firewall add action=dst-nat chain=dstnat comment="" disabled=no dst-port=80 protocol=tcp to-addresses=<proxy address> to-ports=<proxy port></code>
 
 
 
I also think that it is necessary to tell the reader that one have to configure the Squid proxy to act as a transparent proxy.
 
 
 
This info was taken from: http://forum.mikrotik.com/viewtopic.php?f=1&t=21271&start=0
 

Latest revision as of 10:28, 10 August 2009

Regarding "Webbox problem" - the webbox should work even with NAT rule in place. If it doesn't, contact MT support. --Route 11:28, 10 August 2009 (EEST)