Talk:How to make transparent web proxy

From MikroTik Wiki
Revision as of 03:03, 23 February 2009 by Bigchirv (talk | contribs)
Jump to: navigation, search


Redirecting directly using firewall rule

I found this on the MT Forums and I think it should be in this page:

/ip firewall add action=dst-nat chain=dstnat comment="" disabled=no dst-port=80 protocol=tcp to-addresses=<proxy address> to-ports=<proxy port>

I also think that it is necessary to tell the reader that one have to configure the Squid proxy to act as a transparent proxy.

This info was taken from: