Difference between revisions of "Transparently Bridge two Networks without using WDS (EoIP)"

From MikroTik Wiki
Jump to: navigation, search
 
Line 37: Line 37:
 
'''<br>
 
'''<br>
 
[[Image:EoIPClient8.jpg]]<br><br>
 
[[Image:EoIPClient8.jpg]]<br><br>
 +
 +
[[Category:Bridging]]
 +
[[Category:Routing]]

Latest revision as of 13:01, 17 October 2009

Server Setup:


Server IP Addresses

/ ip address add address=192.168.0.1/24 interface=ether1 disabled=no
/ ip address add address=192.168.1.1/24 interface=wlan1 disabled=no

EoIPServer1.jpg

EoIPServer2.jpg

EoIPServer3.jpg

EoIPServer4.jpg

EoIPServer5.jpg

EoIPServer6.jpg

EoIPServer7.jpg



Client Setup:


Client IP Addresses

/ ip address add address=192.168.0.2/24 interface=ether1 disabled=no
/ ip address add address=192.168.1.2/24 interface=wlan1 disabled=no

EoIPClient1.jpg

EoIPClient2.jpg

Note that this image is incorrect - Set the Mode to Station and it will work fine then EoIPClient3.jpg

EoIPClient4.jpg

EoIPClient5.jpg

EoIPClient6.jpg

EoIPClient7.jpg



Check your setup


EoIPClient8.jpg