User/Routing: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
m (→Routing: new topic) |
||
| Line 3: | Line 3: | ||
* [[ECMP load balancing with masquerade]] | * [[ECMP load balancing with masquerade]] | ||
* [[NTH load balancing with masquerade]] | * [[NTH load balancing with masquerade]] | ||
* [[NTH load balancing with masquerade (another approach)]] | |||
* [[Internet_Sharing|Basic Internet Connection Sharing (NAT)]] | * [[Internet_Sharing|Basic Internet Connection Sharing (NAT)]] | ||
* [[Connection Sharing in a Single MAC-Address Restricted Service Access]] | * [[Connection Sharing in a Single MAC-Address Restricted Service Access]] | ||
Revision as of 10:15, 9 April 2009
Routing
- ECMP load balancing with masquerade
- NTH load balancing with masquerade
- NTH load balancing with masquerade (another approach)
- Basic Internet Connection Sharing (NAT)
- Connection Sharing in a Single MAC-Address Restricted Service Access
- Multiple gateway simple failover
- Bonding
- Load Balancing over Multiple Gateways
- ECMP Failover Script
- Routing Questions
- Suggested literature (Book review)
- Policy Routing in RouterOS 2.9.x
- Policy Routing in RouterOS 3.x
- Route Selection Algorithm in RouterOS
- MME wireless routing protocol
- MME command reference
- Layer-2 routing for Mesh networks
- Routing local + international + unshaped traffic through 3 separate adsl accounts
MPLS
- See MPLS.
BGP
- BGP HowTo & FAQ
- BGP Best Path Selection Algorithm
- BGP Case Studies
- MT BGP configuration with corresponding Cisco settings
- BGP soft reconfiguration alternatives in RouterOS
- Using scope and target-scope attributes
- Limiting maximum number of prefixes accepted
- BGP nexthop selection and validation in RouterOS 3.x
- BGP Load Balancing with two interfaces
OSPF
- OSPF and Point-to-Point interfaces
- OSPF and Area summaries
- OSPF to simulate full duplex links with redundancy
- OSPF and PPPoE Setup
- OSPFv3 with Quagga