User Manager/Hotspot Example

From MikroTik Wiki
< User Manager
Revision as of 13:10, 17 October 2006 by Normis (talk | contribs) (User Manager Example Hotspot moved to User Manager Hotspot Example)
Jump to navigation Jump to search

Introduction

To make this setup, you should have running Hotspot server on the router. Let's consider configuration steps for HotSpot and User Manager routers, in order to use User Manager for HotSpot users.

User Manager configuration

 / tool user-manager router add subscriber=MikroTik ip-address=x.x.x.x shared-secret=123456

'x.x.x.x' is the address of the HotSpot router, 'shared-secret' should match on both User Manager and HotSpot routers.

  • Add HotSpot user information, it is equal to 'ip hotspot user' when local HotSpot is used for clients
 / tool user-manager user add username=demo password=demo subscriber=MikroTik

We discuss only basic configuration example, detailed information about 'user' menu configuration.

HotSpot configuration

  • Set HotSpot to use User Manager for HotSpot server users,
 / ip hotspot profile set hsprof1 use-radius=yes
  • Add radius client to consult User Manager for HotSpot service. 'address=127.0.0.1' points RADIUS client to use local router as RADIUS server, 'secret' is shared secret used to access the RADIUS server.
 / radius add service=hotspot address=y.y.y.y secret=123456

'secret' is equal to User Manager router secret. 'y.y.y.y' is the User Manager router address.

  • Note, first local HotSpot database is consulted, then User Manager database.