Difference between revisions of "Wireless Matrix"

From MikroTik Wiki
Jump to: navigation, search
m (Wireless Feature Applicability Matrix)
(Wireless Features Matrix)
 
(7 intermediate revisions by 2 users not shown)
Line 3: Line 3:
 
* '''Note''' that there are 2 columns for 802.11 protocol: '''802.11''' specifies availability of mode in "pure" 802.11 network (when connecting to any vendor AP) and '''ROS 802.11''' specifies availability of mode when connecting to RouterOS AP that implements necessary proprietary extensions for mode to work.
 
* '''Note''' that there are 2 columns for 802.11 protocol: '''802.11''' specifies availability of mode in "pure" 802.11 network (when connecting to any vendor AP) and '''ROS 802.11''' specifies availability of mode when connecting to RouterOS AP that implements necessary proprietary extensions for mode to work.
  
=== Wireless Feature Applicability Matrix===
+
=== Wireless Features Matrix===
  
The matrix specifies '''/interface wireless''' compatibility with wireless protocols.
+
The matrix specifies ''/interface wireless'' parameters compatibility with each '''wireless-protocol'''.
  
 
{| cellpadding="5" border="1"
 
{| cellpadding="5" border="1"
Line 54: Line 54:
 
|'''disabled'''||V||V||V||V  
 
|'''disabled'''||V||V||V||V  
 
|-
 
|-
|'''disconnect-timeout'''||V||V||V||  
+
|'''disconnect-timeout'''||V||V||||  
 
|-
 
|-
 
|'''distance'''||V||V|| ||  
 
|'''distance'''||V||V|| ||  
Line 120: Line 120:
 
|'''nv2-security'''|| || || ||V
 
|'''nv2-security'''|| || || ||V
 
|-
 
|-
|'''on-fail-retry-time'''||V||V||V||
+
|'''on-fail-retry-time'''||V||V||||
 
|-
 
|-
 
|'''periodic-calibration'''||V||V||V||
 
|'''periodic-calibration'''||V||V||V||
Line 168: Line 168:
 
|'''wireless-protocol'''||V||V||V||V
 
|'''wireless-protocol'''||V||V||V||V
 
|-
 
|-
|'''wmm-support'''||V||V||V||
+
|'''wmm-support'''||V||V|| ||
 +
|-
 +
|'''virtual-access-point-support'''||V||V||V||
 
|}
 
|}
  
 
'''*''' - Nv2 protocol uses different [[Manual:Nv2#Security_in_Nv2_network | security configuration]].
 
'''*''' - Nv2 protocol uses different [[Manual:Nv2#Security_in_Nv2_network | security configuration]].
  
===WDS Applicability Matrix===
+
===WDS setups Matrix===
  
The following matrix specifies possible ''WDS'' network setups for each '''wireless-protocol'''. First column specifies possible WDS network structure.
+
The matrix specifies possible ''WDS'' network setups for each '''wireless-protocol'''. First column specifies possible WDS network structure.
  
 
{| cellpadding="3" border="1"
 
{| cellpadding="3" border="1"
Line 189: Line 191:
 
'''*''' -  mode=ap-bridge applies to mode=bridge too.
 
'''*''' -  mode=ap-bridge applies to mode=bridge too.
  
=== Station Applicability Matrix ===
+
=== Station modes Matrix ===
  
The following matrix specifies ''station'' modes available for each '''wireless-protocol'''.
+
The matrix specifies ''station'' modes available for each '''wireless-protocol'''.
  
 
{| cellpadding="5" border="1"
 
{| cellpadding="5" border="1"

Latest revision as of 12:14, 12 February 2015

Feature Matrix General Information

  • Feature Matrix indicates wireless network type when specific feature can be used.
  • Note that there are 2 columns for 802.11 protocol: 802.11 specifies availability of mode in "pure" 802.11 network (when connecting to any vendor AP) and ROS 802.11 specifies availability of mode when connecting to RouterOS AP that implements necessary proprietary extensions for mode to work.

Wireless Features Matrix

The matrix specifies /interface wireless parameters compatibility with each wireless-protocol.

802.11 ROS 802.11 nstreme nv2
adaptive-noise-immunity V V V V
allow-sharedkey V V V
antenna-gain V V V V
antenna-gain V V V V
antenna-mode V V V V
area V V V V
arp V V V V
band V V V V
basic-rates-a/g V V V V
basic-rates-b V V V V
bridge-mode V V V V
burst-time
channel-width V V V V
comment V V V V
country V V V V
default-ap-tx-limit V V V V
default-authentication V V V V
default-client-tx-limit V V V V
default-forwarding V V V V
dfs-mode V V V V
disable-running-check V V V V
disabled V V V V
disconnect-timeout V V
distance V V
frame-lifetime V V
frequency V V V V
frequency-mode V V V V
hide-ssid V V V
ht-ampdu-priorities V V
ht-amsdu-limit V V V
ht-amsdu-threshold V V
ht-basic-mcs V V V V
ht-guard-interval V V V V
ht-rxchains V V V V
ht-supported-mcs V V V V
ht-txchains V V V V
hw-fragmentation-threshold V V
hw-protection-mode V V
hw-protection-threshold V V
hw-retries V V V
l2mtu V V V V
mac-address V V V V
master-interface V V V
mac-address V V V V
max-station-count V V V V
mode V V V V
mtu V V V V
name V V V V
noise-floor-threshold V V V V
nv2-cell-radius V
nv2-noise-floor-offset V
nv2-preshared-key V
nv2-qos V
nv2-queue-count V
nv2-security V
on-fail-retry-time V V
periodic-calibration V V V
periodic-calibration-interval V V V
preamble-mode V V V
prism-cardtype V V
proprietary-extensions V V V V
radio-name V V V V
rate-selection V V V V
rate-set V V V V
scan-list V V V V
security-profile V V V *
ssid V V V V
station-bridge-clone-mac V V V
supported-rates-a/g V V V V
supported-rates-b V V V V
tx-power V V V V
tx-power-mode V V V V
update-stats-interval V V V
wds-cost-range V V V V
wds-default-bridge V V V V
wds-default-cost V V V V
wds-ignore-ssid V V V
wds-mode V V V V
wireless-protocol V V V V
wmm-support V V
virtual-access-point-support V V V

* - Nv2 protocol uses different security configuration.

WDS setups Matrix

The matrix specifies possible WDS network setups for each wireless-protocol. First column specifies possible WDS network structure.

ROS 802.11 nstreme nv2
AP-bridge* to AP-bridge V
AP-bridge to Station-WDS V V V
AP-bridge to WDS-Slave V

* - mode=ap-bridge applies to mode=bridge too.

Station modes Matrix

The matrix specifies station modes available for each wireless-protocol.

802.11 ROS 802.11 nstreme nv2
station V V V V
station-wds V V V
station-pseudobridge V V V
station-pseudobridge-clone V V V
station-bridge V V V

More information about stations mode configuration.