This menu allows to configure system to reboot, when an specific IP address does not respond, or when it detects, that the software has locked up. The detection is done in two ways:
- Software watchdog timer (mostly caused by hardware malfunction) device can recover itself with reboot.
- Ping watchdog can monitor connectivity to an specific IP address and trigger reboot function.
|watch-address (IP; Default: none)||The system will reboot in case 6 sequental pings to the given IP address (sent once per 10 seconds) will fail. If set to none this feature is disabled.|
|watchdog-timer (yes | no; Default: yes)||Whether to reboot if system is unresponsive for a minute|
|no-ping-delay (time; Default: 5m)||Specifies how long after reboot not to test and ping watch-address. The default setting means that if watch-address is set and is not reachable, the router will reboot about every 6 minutes.|
|automatic-supout (yes | no; Default: yes)||When software failure happens, a file named "autosupout.rif" is generated automatically. The previous "autosupout.rif" file is renamed to "autosupout.old.rif"|
|auto-send-supout (yes | no; Default: no)||After the support output file is automatically generated, it can be sent by email|
|send-email-from (string; Default: )||e-mail address to send the support output file from. If not set, the value set in /tool e-mail is used|
|send-email-to (string; Default: )||e-mail address to send the support output file to.|
|send-smtp-server (string; Default: )||SMTP server address to send the support output file through. If not set, the value set in /tool e-mail is used.|
To make system generate a support output file and sent it automatically to email@example.com throught the 192.0.2.1in case of a software crash:
[admin@MikroTik] system watchdog> set auto-send-supout=yes \ \... firstname.lastname@example.org send-smtp-server=192.0.2.1 [admin@MikroTik] system watchdog> print watch-address: none watchdog-timer: yes no-ping-delay: 5m automatic-supout: yes auto-send-supout: yes send-smtp-server: 192.0.2.1 send-email-to: email@example.com [admin@MikroTik] system watchdog>[ Top | Back to Content ]