May 16, 2018 · Configuration. Start by creating a new bridge on AP and ST and add ether1 and wlan1 ports to it: /interface bridge add name=bridge ...

Feb 25, 2021 · By setting tag-stacking=yes on a bridge port, you will add another VLAN tag with the PVID value on top of any other tag for all ingress packets.

Jan 17, 2022 · The configuration method changes across different models, this guide will focus on setting up a basic trunk/access port setup with a management ...

Jul 21, 2021 · 1) In VLAN menu configure Default VLAN ID on planned access ports to assign untagged traffic to specific VLAN in the switch. Alt text. Access ...

Jul 31, 2019 · This page will show how to configure multiple switches to use port trunking and port based VLANs, it will also show a working example with a ...

Sep 18, 2020 · Both ingress and egress port must be found in the VLAN Table for the appropriate VLAN ID, otherwise traffic is dropped.

Jul 21, 2021 · Simple trunk and access port configuration, as well as trunk and hybrid port configuration examples can be found in this article - SWOS/CSS326- ...

Jun 12, 2019 · 1) In VLAN menu configure Default VLAN ID on planned access ports to assign untagged traffic to specific VLAN in the switch. ... 2) In VLANs menu ...

May 19, 2022 · This algorithm exchanges configuration messages (BPDU - Bridge Protocol Data Unit) periodically, so that all bridges are updated with the newest ...