Transparently Bridge two Networks without using WDS (EoIP)

From MikroTik Wiki
Jump to: navigation, search

Server Setup:


Server IP Addresses

/ ip address add address=192.168.0.1/24 interface=ether1 disabled=no
/ ip address add address=192.168.1.1/24 interface=wlan1 disabled=no

EoIPServer1.jpg

EoIPServer2.jpg

EoIPServer3.jpg

EoIPServer4.jpg

EoIPServer5.jpg

EoIPServer6.jpg

EoIPServer7.jpg



Client Setup:


Client IP Addresses

/ ip address add address=192.168.0.2/24 interface=ether1 disabled=no
/ ip address add address=192.168.1.2/24 interface=wlan1 disabled=no

EoIPClient1.jpg

EoIPClient2.jpg

Note that this image is incorrect - Set the Mode to Station and it will work fine then EoIPClient3.jpg

EoIPClient4.jpg

EoIPClient5.jpg

EoIPClient6.jpg

EoIPClient7.jpg



Check your setup


EoIPClient8.jpg