IPv6 Settings allow to configure several IPv6 related kernel parameters.
Warning: If changing settings the new configuration should not result with SLAAC address assigned to the router and old configuration had that address, the router have to be rebooted, or wait till SLAAC address times out
Properties
Property
Description
forward (yes | no; Default: yes)
Enable/disable packet forwarding between interfaces.
accept-redirects (no | yes-if-forwarding-disabled; Default: yes-if-forwarding-disabled)
Whether to accept ICMP redirect messages.
Typically should be enabled on host and disabled on routers.
accept-router-advertisements (no | yes | yes-if-forwarding-disabled; Default: yes-if-forwarding-disabled)
