Manual:System/Resource: Difference between revisions

From MikroTik Wiki
Jump to navigation Jump to search
Line 69: Line 69:
}}
}}


{{Mr-arg-ro-table
|arg=active-cpu
|type=integer
|desc=Shows active CPU in multicore systems.
}}
{{Mr-arg-ro-table
|arg=count
|type=integer
|desc=Number of interrupts.
}}
{{Mr-arg-ro-table
|arg=irq
|type=integer
|desc=IRQ identification number
}}
{{Mr-arg-ro-table-end
|arg=users
|type=string
|desc=Process assigned to IRQ
}}


===IRQ Load Balancing===
===IRQ Load Balancing===

Revision as of 12:40, 11 October 2010

Applies to RouterOS: v3, v4 +

Summary

General

Sub-menu level: /system resource


Properties

Property Description
- (string; Default: )

CPU

Sub-menu level: /system resource cpu

(needs editing)

Properties

Property Description
- (string; Default: )

IRQ

Sub-menu level: /system resource irq


Menu shows all used IRQs on the router. It is possible to set up IRQ load balancing on mulicore systems by assigning IRQ to specific core.

Properties

Property Description
cpu (auto | integer; Default: ) Specifies which CPU is assigned to the IRQ.
  • auto - pick CPU based on number of interrupts

Read-only properties

Property Description
active-cpu (integer) Shows active CPU in multicore systems.
count (integer) Number of interrupts.
irq (integer) IRQ identification number
users (string) Process assigned to IRQ

IRQ Load Balancing

USB

Sub-menu level: /system resource usb

This menu displays all available USB controllers on the board. Menu is available only if at least one USB controller is present.

[admin@MikroTik] /system resource usb> print detail 
 0 device="2:1" name="RB400 EHCI" serial-number="rb400_usb" vendor-id="0x1d6b" 
   device-id="0x0002" speed="480 Mbps" ports=2 usb-version="2.00" 

 1 device="1:1" name="RB400 OHCI" serial-number="rb400_usb" vendor-id="0x1d6b" 
   device-id="0x0001" speed="12 Mbps" ports=2 usb-version="1.10" 

Properties

Property Description
device (string)
device-id (hex) Hexadecimal device ID
name (string) Descriptive name of the device retrieved from driver
ports (integer) How many ports are supported by usb controller
serial-number (string)
speed (string) Max USB speed that can be used (480Mbps for USBv2 and 12Mbps for USBv1)
usb-version (string) Identifies max spported USB version
vendor (string) Device manufacturer's name.
vendor-id (hex) Hexadecimal vendor ID

PCI

Sub-menu level: /system resource pci

PCI submenu shows the information about all PCI devices on the board

[admin@RB1100test] /system resource pci> print 
 # DEVICE   VENDOR                        NAME                       IRQ       
 0 06:00.0  Attansic Technology Corp.     unknown device (rev: 192)  18        
 1 05:00.0  Freescale Semiconductor Inc   MPC8544 (rev: 17)          0         
 2 04:00.0  Attansic Technology Corp.     unknown device (rev: 192)  17        
 3 03:00.0  Freescale Semiconductor Inc   MPC8544 (rev: 17)          0         
 4 02:00.0  Attansic Technology Corp.     unknown device (rev: 192)  16        
 5 01:00.0  Freescale Semiconductor Inc   MPC8544 (rev: 17)          0         
 6 00:00.0  Freescale Semiconductor Inc   MPC8544 (rev: 17)          0 


Properties

All properties are read-only

Property Description
category (string) PCI device type, for example ethernet controller
device (string)
device-id (hex) Hexadecimal device ID
io (hex-hex) I/O memory range
irq (integer) IRQ asigned to the device
memory (hex-hex) Memory range
name (string) Descriptive name of the device retrieved from driver
vendor (string) Device manufacturer's name.
vendor-id (hex) Hexadecimal vendor ID