Manual:IP/Services

Applies to RouterOS: v3, v4

Summary

Sub-menu: /ip service

This document lists protocols and ports used by various MikroTik RouterOS services. It helps you to determine why your MikroTik router listens to certain ports, and what you need to block/allow in case you want to prevent or grant access to the certain services. Please see the relevant sections of the Manual for more explanations.

Properties

Note that it is not possible to add new services, only existing service modifications are allowed.

Property	Description
address (IP address/netmask | IPv6/0..128; Default: )	List of IP/IPv6 prefixes from which the service is accessible.
certificate (name; Default: none)	The name of the certificate used by particular service. Applicable only for services that depends on certificates (www-ssl, api-ssl)
name (name; Default: none)	Service name
port (integer: 1..65535; Default: )	The port particular service listens on

Example

For example allow telnet only from specific IPv6 address range

[admin@dzeltenais_burkaans] /ip service> set api address=10.5.101.0/24,2001:db8:fade::/64
[admin@dzeltenais_burkaans] /ip service> print 
Flags: X - disabled, I - invalid 
 #   NAME     PORT  ADDRESS                                       CERTIFICATE  
 0   telnet   23   
 1   ftp      21   
 2   www      80   
 3   ssh      22   
 4 X www-ssl  443                                                 none         
 5   api      8728  10.5.101.0/24                                
                    2001:db8:fade::/64                           
 6   winbox   8291 

Service Ports

Sub-menu: /ip firewall service-port

Hosts behind a NAT-enabled router do not have true end-to-end connectivity. Therefore some Internet protocols might not work in scenarios with NAT.

To overcome these limitations RouterOS includes a number of NAT helpers, that enable NAT traversal for various protocols.

Note: If connection tracking is not enabled then firewall service ports will be shown as inactive

Helper	Description
FTP	FTP service helper
h323	H323 service helper
irc
PPTP	PPTP tunneling helper.
SIP	SIP helper. Additional option "sip-direct-media" allows redirect the RTP media stream to go directly from the caller to the callee. Default value is yes.
tftp

Protocols and ports

Table below shows the list of protocols and ports used by RouterOS.

Proto/Port	Description
20/tcp	FTP data connection
21/tcp	FTP control connection
22/tcp	Secure Shell (SSH) remote Login protocol
23/tcp	Telnet protocol
53/tcp 53/udp	DNS
67/udp	Bootstrap protocol or DHCP Server
68/udp	Bootstrap protocol or DHCP Client
80/tcp	World Wide Web HTTP
123/udp	Network Time Protocol ( NTP)
161/udp	Simple Network Management Protocol (SNMP)
179/tcp	Border Gateway Protocol ( BGP)
443/tcp	Secure Socket Layer (SSL) encrypted HTTP
500/udp	Internet Key Exchange (IKE) protocol
520/udp 521/udp	RIP routing protocol
646/tcp	LDP transport session
646/udp	LDP hello protocol
1080/tcp	SOCKS proxy protocol
1698/udp 1699/udp	RSVP TE Tunnels
1701/udp	Layer 2 Tunnel Protocol ( L2TP)
1723/tcp	Point-To-Point Tunneling Protocol ( PPTP)
1900/udp 2828/tcp	Universal Plug and Play ( uPnP)
1966/udp	MME originator message traffic
1966/tcp	MME gateway protocol
2000/tcp	Bandwidth test server
5678/udp	Mikrotik Neighbor Discovery Protocol
6343/tcp	Default OpenFlow port
8080/tcp	HTTP Web Proxy
8291/tcp	Winbox
8728/tcp	API
8729/tcp	API-SSL
20561/udp	MAC winbox
/1	ICMP
/2	Multicast | IGMP
/4	IPIP encapsulation
/41	IPv6 (encapsulation)
/46	RSVP TE tunnels
/47	General Routing Encapsulation (GRE) - used for PPTP and EoIP tunnels
/50	Encapsulating Security Payload for IPv4 (ESP)
/51	Authentication Header for IPv4 (AH)
/89	OSPF routing protocol
/103	Multicast | PIM
/112	VRRP

[ Top | Back to Content ]