Difference between revisions of "Manual:System/LEDS"

From MikroTik Wiki
Jump to: navigation, search
m (Configuration Properties)
m (add ap-cap LED status command)
Line 65: Line 65:
 
{{Mr-arg-table-end
 
{{Mr-arg-table-end
 
|arg=type
 
|arg=type
|type=flash-access {{!}} interface-activity {{!}} interface-receive {{!}} interface-status {{!}} interface-transmit {{!}} modem-signal {{!}} wireless-signal-strength {{!}} wireless-status
+
|type=ap-cap{{!}} flash-access {{!}} interface-activity {{!}} interface-receive {{!}} interface-speed {{!}} interface-status {{!}} interface-transmit {{!}} modem-signal {{!}} poe-out {{!}} wireless-signal-strength {{!}} wireless-status
 
|default=
 
|default=
 
|desc=Type of the status:
 
|desc=Type of the status:
 +
* <var>ap-cap</var> - blink on CAP initialising with CAPsMAN, steady on once connected
 
* <var>flash-access</var> - blink the led on flash access
 
* <var>flash-access</var> - blink the led on flash access
 
* <var>interface-activity</var> - blink the led on interface (traffic) activity
 
* <var>interface-activity</var> - blink the led on interface (traffic) activity
 
* <var>interface-receive</var> - blink the led on interface received traffic
 
* <var>interface-receive</var> - blink the led on interface received traffic
 +
* <var>interface-speed</var> -
 
* <var>interface-status</var> - light the led on interface status change
 
* <var>interface-status</var> - light the led on interface status change
 
* <var>interface-transmit</var> - blink the led on interface transmitted traffic
 
* <var>interface-transmit</var> - blink the led on interface transmitted traffic
 
* <var>modem-signal</var> - blink the led on 3G modem signal (eiher USB or miniPCIe)
 
* <var>modem-signal</var> - blink the led on 3G modem signal (eiher USB or miniPCIe)
 +
* <var>poe-out</var>
 
* <var>wireless-signal-strength</var> - light the leds displaying wireless signal (requires more than one led)
 
* <var>wireless-signal-strength</var> - light the leds displaying wireless signal (requires more than one led)
 
* <var>wireless-status</var> - light the led on wireless status change.
 
* <var>wireless-status</var> - light the led on wireless status change.
Line 80: Line 83:
  
 
==Basic examples==
 
==Basic examples==
 
+
Enable the User ACT LED to show current CAP status on a RB951
 
+
<pre>
 +
/system leds
 +
add leds=user-led type=ap-cap
 +
</pre>
  
 
{{cont}}
 
{{cont}}

Revision as of 20:26, 25 November 2014

Version.png

Applies to RouterOS: v5 +


Summary

Sub-menu: /system leds
Standards:


RouterOS allows to configure each leds activity the way that user wishes. It is possible to configure the leds to display wireless strength, blink the leds on interface traffic activity and many other options.

For example default led configuration on Groove

[admin@MikroTik] /system leds> print 
Flags: X - disabled 
 #   TYPE                     INTERFACE                   LEDS                 
 0   wireless-signal-strength                             led1                 
                                                          led2                 
                                                          led3                 
                                                          led4                 
                                                          led5                 
 1   interface-activity       ether1                      user-led     

RB Groove uses five leds for wireless strength and one for ethernet activity monitoring.

Configuration Properties

Property Description
disabled (yes | no; Default: no) Whether item is disabled
interface (string; Default: ) Name of the interface which will be used for led status. Applicable only if type is interface specific.
modem-signal-treshold (integer [-113..-51]; Default: ) Applicable if type is modem-signal
leds (list of leds; Default: ) List of led names used for status report. For example wireless signal strength will require more than one led.
type (ap-cap| flash-access | interface-activity | interface-receive | interface-speed | interface-status | interface-transmit | modem-signal | poe-out | wireless-signal-strength | wireless-status; Default: ) Type of the status:
  • ap-cap - blink on CAP initialising with CAPsMAN, steady on once connected
  • flash-access - blink the led on flash access
  • interface-activity - blink the led on interface (traffic) activity
  • interface-receive - blink the led on interface received traffic
  • interface-speed -
  • interface-status - light the led on interface status change
  • interface-transmit - blink the led on interface transmitted traffic
  • modem-signal - blink the led on 3G modem signal (eiher USB or miniPCIe)
  • poe-out
  • wireless-signal-strength - light the leds displaying wireless signal (requires more than one led)
  • wireless-status - light the led on wireless status change.

Basic examples

Enable the User ACT LED to show current CAP status on a RB951

/system leds
add leds=user-led type=ap-cap

[ Top | Back to Content ]