Manual:IPv6/Settings

From MikroTik Wiki
Jump to: navigation, search
Version.png

Applies to RouterOS: v6+

Summary

Sub-menu: /ipv6 settings


IPv6 Settings allow to configure several IPv6 related kernel parameters.

Icon-warn.png

Warning: If changing settings the new configuration should not result with SLAAC address assigned to the router and old configuration had that address, the router have to be rebooted, or wait till SLAAC address times out


Properties

Property Description
forward (yes | no; Default: yes) Enable/disable packet forwarding between interfaces.
accept-redirects (no | yes-if-forwarding-disabled; Default: yes-if-forwarding-disabled) Whether to accept ICMP redirect messages. Typically should be enabled on host and disabled on routers.
accept-router-advertisements (no | yes | yes-if-forwarding-disabled; Default: yes-if-forwarding-disabled) Accept router advertisement (RA) messages. If enabled router will be able to get address using stateless address configuration


[ Top | Back to Content ]