Setup Dual Wireless Link with OSPF

From MikroTik Wiki
Jump to: navigation, search

In this example we'll set up two radios in each side, providing double the bandwidth and redundancy.
We'll be using another radio to control the OSPF links and two radios to provide the wireless links, so in reality we'll need 03 radios in each side. This is as good as one can get in reliability and redundancy. For a single radio example see this link.
Full-duplex2.gif
The wireless links set up will be using WDS and they'll point to the bridge, a How-To for setting up WDS can be found here.

...to be continued.

http://wiki.mikrotik.com/wiki/OSPF_to_simulate_full_duplex_links_with_redundancy ... Complete setup similar to shown above active for almost one year. (which is exactly as my other tutorial here http://wiki.mikrotik.com/wiki/Dual_Setup_with_OSPF This one here can give you the most reliability as it uses two radios, if one goes down...