Category:Manual

Basic

• Connection oriented communication (TCP/IP)
• RouterOS FAQ
• Console login process
• RouterOS features
• First time startup
• Winbox
• Making a simple wireless AP

RouterOS Licensing

• Replacement Key
• Purchasing a License for RouterOS
• Entering a RouterOS License key
• License levels
• All about licenses

RouterOS Installation and packages

• Upgrading RouterOS
• Configuration Management
• CD Install
• Netinstall
• System/Packages

Wireless

VPN

DHCP

• Spectrum analyzer
• Wireless AP Client
• Interface/Wireless
• WMM
• Wireless Debug Logs
• Wireless FAQ

• BCP bridging (PPP tunnel bridging)
• IP/IPsec
• Interface/VPLS
• Interface/EoIP
• Interface/IPIP
• Interface/L2TP
• Interface/PPPoE
• Interface/PPTP
• Interface/SSTP
• Interface/VLAN
• TE Tunnels Example
• MLPPP over single and multiple links

• IP/DHCP Server
• IP/DHCP Relay
• IP/DHCP Client

Traffic control

Firewall control

IP and Routing

• Interface/Traffic Engineering
• HTB
• Queue Size
• Queues - PCQ Examples
• Queues - PCQ
• Queues - Burst
• Packet Flow
• Queue
• Interface/Bonding
• TE Tunnels Example
• MPLS/Traffic-eng
• TE Tunnels
• TE tunnel auto bandwidth

• Connection tracking
• Routing Table Matcher
• IP/Firewall/L7
• IP/Firewall/NAT
• IP/Firewall/Mangle
• IP/Firewall/Filter
• IP/Firewall/Address list
• Connection Rate
• PCC
• IP/Services
• NTH in RouterOS 3.x

• Ip address
• ARP

• Routes in general
• VRF
• Routing filters

• OSPF
  • OSPF Case Studies
  • OSPF Exampes
• BGP
  • BGP based VPLS
  • BGP HowTo & FAQ
  • BGP Soft Reconfiguration
  • BGP Load Balancing
• RIP
  • Prefix list
• MME
  • MME Case Studies

Internetworking

Hardware

Virtualization

• Layer-3 MPLS VPN example
• Internet access from VRF
• Interface/Traffic Engineering
• Virtual Routing and Forwarding
• Routing/Multicast
• OSPF as PE-CE routing protocol
• Routing/IGMP-Proxy
• Interface/VPLS
• BGP based VPLS
• Cisco VPLS
• MPLS over PPPoE
• TE Tunnels Example
• MPLS/Traffic-eng
• TE tunnel auto bandwidth
• MPLS/LDP
• MPLS
• EBGP as PE-CE routing protocol
• TE Tunnels
• MPLS/EXP bit behaviour
• MPLSVPLS
• MPLS/Overview

• Switch Chip Features
• RouterBOARD bad blocks
• Password reset
• Bootloader upgrade
• Netinstall
• Interface/Ethernet
• Wireless card diagnostics
• Interface
• Maximum Transmission Unit on RouterBoards

• Metarouter
• Interface/Virtual-ethernet
• Xen
• Virtualization
• KVM

Monitoring

System settings

• System/UPS
• IP/Traffic Flow
• System/Log
• Wireless Debug Logs

• System/Health
• Create Certificates
• Store
• System/Watchdog
• System/Scheduler
• Support Output File
• Upgrading RouterOS
• Bootloader upgrade
• CPU Usage
• System/Time
• System/Packages
• API

Console

User management

Examples

• Line editor
• Console login process
• Special Login
• Configuration Management
• Prompt
• First time startup
• Scripting-examples
• Console
• Scripting
• Lua
• System/Serial Console

• PPP AAA
• IP/Hotspot
• RADIUS Client
• Router AAA
• User Manager

• My First IPv6 Network
• Create Certificates
• Simple Static Routing
• Wireless AP Client
• OSPF and Point-to-Point interfaces
• Bonding Examples
• Layer-3 MPLS VPN example
• Internet access from VRF
• Support Output File
• Routing Table Matcher
• Connection Rate
• Load balancing multiple same subnet links
• Using scope and target-scope attributes
• PCC
• Queues - PCQ Examples
• Scripting-examples
• OSPF as PE-CE routing protocol
• OSPF-examples
• BGP based VPLS
• BGP Load Balancing with two interfaces
• VRRP-examples
• Wireless card diagnostics
• OSPFv3 with Quagga
• Creating IPv6 loopback address
• MPLS over PPPoE
• TE Tunnels Example
• Making a simple wireless AP
• MPLS/EXP bit behaviour
• Multicast SPT Switchover
• EBGP as PE-CE routing protocol

Interface

IP

Routing

IPv6

MPLS

System

Tools